기기를 수리하세요 커뮤니티 상점

Insignia Sport NS-4V17 Motherboard Replacement

소개

Can't identify the source of your problem and suspect that the motherboard has something to do with it? This guide will show you how to remove the motherboard. Buckle down because this is the longest guide.

필요한 것

  1. Insignia Sport NS-4V17 Motherboard Replacement, Battery: 1 단계, 이미지 1/1

    • Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.

    편집

  2. Insignia Sport NS-4V17 Motherboard Replacement: 2 단계, 이미지 1/2 Insignia Sport NS-4V17 Motherboard Replacement: 2 단계, 이미지 2/2

    • Detach the back cover by carefully pulling up and out on the back plastic casing.

    • Do not pull apart the red wire connecting the battery to the device.

    편집

  3. Insignia Sport NS-4V17 Motherboard Replacement: 3 단계, 이미지 1/1

    • Use the plastic opening tool to reach underneath the battery, opposite from the side with the red wire, and remove it from its plastic case.

    • Be careful to not tear the wires while opening the case.

    편집

  4. Insignia Sport NS-4V17 Motherboard Replacement: 4 단계, 이미지 1/1

    • Reach under the white plastic wire connector using the plastic opening tool and disconnect it from the socket.

    • Do not disconnect wires from plastic connector.

    편집

  6. Insignia Sport NS-4V17 Motherboard Replacement, Front Case Cover: 5 단계, 이미지 1/2 Insignia Sport NS-4V17 Motherboard Replacement, Front Case Cover: 5 단계, 이미지 2/2

    • Remove the four corner plastic covers on the back of the device using the plastic opening tool.

    편집

  7. Insignia Sport NS-4V17 Motherboard Replacement: 6 단계, 이미지 1/1

    • Using a Philips #00 screwdriver remove all four 4.5mm corner screws located underneath the corner pads.

    편집

  8. Insignia Sport NS-4V17 Motherboard Replacement: 7 단계, 이미지 1/3 Insignia Sport NS-4V17 Motherboard Replacement: 7 단계, 이미지 2/3 Insignia Sport NS-4V17 Motherboard Replacement: 7 단계, 이미지 3/3

    • Carefully wedge the plastic opening tool into either long side of the device.

    • Slowly move the plastic opening tool along the side of the device, separating the front and back case covers.

    • Repeat these steps on the other side of the device.

    편집

  9. Insignia Sport NS-4V17 Motherboard Replacement: 8 단계, 이미지 1/1

    • Once the front cover is loose, use your fingers to remove the front case cover for a new installation.

    편집

  10. Insignia Sport NS-4V17 Motherboard Replacement, Motherboard: 9 단계, 이미지 1/1

    • Remove the white plastic ring from around the scroll wheel with your fingers.

    편집

  11. Insignia Sport NS-4V17 Motherboard Replacement: 10 단계, 이미지 1/1

    • Hold the sides of the device firmly with one hand.

    • Push down on the black favorite switch with your other hand so that it is pushed into the case.

    편집

  12. Insignia Sport NS-4V17 Motherboard Replacement: 11 단계, 이미지 1/2 Insignia Sport NS-4V17 Motherboard Replacement: 11 단계, 이미지 2/2

    • With the component pushed in, lift up the top of the motherboard from the case.

    • Pull the motherboard from the top so that the audio jack and usb input are removed from the case socket.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Wesley Ballar

회원 가입일: 04/18/13

88 평판

안내서 4개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team 12-36, Amido Spring 2013 Cal Poly, Team 12-36, Amido Spring 2013 회원

CPSU-AMIDO-S13S12G36

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 468