주요 콘텐츠로 건너뛰기

Installing a Petsafe Removable Dog Panel

필요한 것

  1. Installing a Petsafe Removable Dog Panel, Petsafe Dog Panel: 1 단계, 이미지 1/1
    • Make sure you have all the tools necessary.

  2. Installing a Petsafe Removable Dog Panel: 2 단계, 이미지 1/1
    • Receive your PetSafe dog door in the mail.

  3. Installing a Petsafe Removable Dog Panel: 3 단계, 이미지 1/2 Installing a Petsafe Removable Dog Panel: 3 단계, 이미지 2/2
    • Measure the height of the sliding glass door frame.

  4. Installing a Petsafe Removable Dog Panel: 4 단계, 이미지 1/3 Installing a Petsafe Removable Dog Panel: 4 단계, 이미지 2/3 Installing a Petsafe Removable Dog Panel: 4 단계, 이미지 3/3
    • Remove your lock latch from the sliding door frame.

    • Lock latches may vary

  5. Installing a Petsafe Removable Dog Panel: 5 단계, 이미지 1/2 Installing a Petsafe Removable Dog Panel: 5 단계, 이미지 2/2
    • Slide the top of your dog panel into the top track of the sliding glass door.

    • Place the bottom portion of the dog panel into the bottom track of the sliding glass door.

  6. Installing a Petsafe Removable Dog Panel: 6 단계, 이미지 1/2 Installing a Petsafe Removable Dog Panel: 6 단계, 이미지 2/2
    • Measure 12” from the top, down the side of your sliding glass door frame and mark it.

    • Mark 1” above the pet flap onto the edge of your sliding glass door.

  7. Installing a Petsafe Removable Dog Panel: 7 단계, 이미지 1/3 Installing a Petsafe Removable Dog Panel: 7 단계, 이미지 2/3 Installing a Petsafe Removable Dog Panel: 7 단계, 이미지 3/3
    • With a 9/64ths drill bit, drill clearance holes into the marks made on the sliding glass door frame

    • DO NOT GO THROUGH THE DOG PANEL

  8. Installing a Petsafe Removable Dog Panel: 8 단계, 이미지 1/3 Installing a Petsafe Removable Dog Panel: 8 단계, 이미지 2/3 Installing a Petsafe Removable Dog Panel: 8 단계, 이미지 3/3
    • Fasten the panel to the interior side of the sliding glass frame with the provided ⅝” screws.

    • MAKE SURE YOU ARE DRILLING OUTSIDE OF THE RIBBED LINE ON THE DOG PANEL.

    • DO NOT OVERTIGHTEN.

  9. Installing a Petsafe Removable Dog Panel: 9 단계, 이미지 1/2 Installing a Petsafe Removable Dog Panel: 9 단계, 이미지 2/2
    • Tighten the screws with a screwdriver.

  10. Installing a Petsafe Removable Dog Panel: 10 단계, 이미지 1/3 Installing a Petsafe Removable Dog Panel: 10 단계, 이미지 2/3 Installing a Petsafe Removable Dog Panel: 10 단계, 이미지 3/3
    • Repeat steps 8 and 9 to secure the dog panel into place. Follow these steps when drilling into the clearance hole marked at the top of the frame.

  11. Installing a Petsafe Removable Dog Panel: 11 단계, 이미지 1/1
    • Slide your sliding door flush against the dog door.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Joshua Novello

회원 가입일: 10/26/18

196 평판

안내서 1개 작성함

UC Davis, Team S1-G1, Bender Fall 2018 UC Davis, Team S1-G1, Bender Fall 2018 회원

UCD-BENDER-F18S1G1

3 회원들

안내서 1개 작성하였습니다

댓글 2개

My dog won’t push hard enough for the magnet to open. Is there a way to temporarily remove the magnet on either the frame or the flap?

LisaD - 답글

LisaD put a piece of masking tape over the magnet or a couple of layers of tape to make it easier to open maybe?

Robert Merry -

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 33

전체 시간: 1,068