주요 콘텐츠로 건너뛰기

Ivation IVWPDC20Y Motherboard Replacement

필요한 것

  1. Ivation IVWPDC20Y Motherboard Replacement, Motherboard: 1 단계, 이미지 1/1
    • With the H2.0 bit screwdriver, remove the two screws on the yellow waterproof cover

  2. Ivation IVWPDC20Y Motherboard Replacement: 2 단계, 이미지 1/1
    • Apply a plastic opening tool to each of the corners and gently remove the casing

    • The front casing is held down by adhesive and may require additional work to remove

    • Apply just enough force to undo the inner latches to make sure not to damage the waterproof seal

  3. Ivation IVWPDC20Y Motherboard Replacement: 3 단계, 이미지 1/1
    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

  4. Ivation IVWPDC20Y Motherboard Replacement: 4 단계, 이미지 1/1
    • Remove the six screws from the edge of the clear inner casing with the PH00 screwdriver bit

    • These screws are very small and easy to strip so apply consistent pressure when removing them

  5. Ivation IVWPDC20Y Motherboard Replacement: 5 단계, 이미지 1/1
    • Pry off back outer casing using the black spudger or the blue prying tools

  6. Ivation IVWPDC20Y Motherboard Replacement: 6 단계, 이미지 1/1
    • Carefully remove the screen from the silver casing using a prying tool or the black spudger

    • There is adhesive in the center of the screen, be sure not to bend it when applying pressure

  7. Ivation IVWPDC20Y Motherboard Replacement: 7 단계, 이미지 1/1
    • Gently push out the pins holding the orange tape down using the pointy end of the spudger

    • Screen and orange tape should slip out as a whole

  8. Ivation IVWPDC20Y Motherboard Replacement: 8 단계, 이미지 1/1
    • Remove three screws holding the silver screen casing to the motherboard using the PH00 bit screwdriver

  9. Ivation IVWPDC20Y Motherboard Replacement: 9 단계, 이미지 1/1
    • Remove three screws holding the motherboard into the casing using the PH00 bit screwdriver bit

  10. Ivation IVWPDC20Y Motherboard Replacement: 10 단계, 이미지 1/1
    • Gently lift the corner of the motherboard out

    • Everything should come out as one component free of the casing

  11. Ivation IVWPDC20Y Motherboard Replacement: 11 단계, 이미지 1/1
    • Remove the soldering on the three wires holding the flash bulb

    • The wires are different colors: red, white, and black

  12. Ivation IVWPDC20Y Motherboard Replacement: 12 단계, 이미지 1/1
    • Remove the two screws holding the lens assembly to the motherboard using the PH00 bit screwdriver

  13. Ivation IVWPDC20Y Motherboard Replacement: 13 단계, 이미지 1/1
    • Remove the soldering on the 3 wires that are connected to the lens unit

  14. Ivation IVWPDC20Y Motherboard Replacement: 14 단계, 이미지 1/1
    • Remove the three screws holding the button sensors to the battery casing using the PH00 screwdriver bit

  15. Ivation IVWPDC20Y Motherboard Replacement: 15 단계, 이미지 1/1
    • Remove soldering on the grouping of wires connecting the button sensors

  16. Ivation IVWPDC20Y Motherboard Replacement: 16 단계, 이미지 1/1
    • Lift screen to reveal wires underneath

    • Remove soldering connecting screen to the motherboard

  17. Ivation IVWPDC20Y Motherboard Replacement: 17 단계, 이미지 1/1
    • Gently pull orange tape from the motherboard

  18. Ivation IVWPDC20Y Motherboard Replacement: 18 단계, 이미지 1/1
    • Remove soldering from the two green wires connected to the motherboard

  19. Ivation IVWPDC20Y Motherboard Replacement: 19 단계, 이미지 1/1
    • Gently bend the capacitor upwards

    • Remove soldering from the two connectors

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Wendy Jones

회원 가입일: 02/06/16

225 평판

안내서 2개 작성하였습니다

USF Tampa, Team 6-6, Eyestone Spring 2016 USF Tampa, Team 6-6, Eyestone Spring 2016 회원

USFT-EYESTONE-S16S6G6

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 416