주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Starting from the front side bottom left corner, use the nylon or metal spudger to lift the grille up from each of the four corners. Follow the previous  instruction to remove the back grille.
    • Starting from the front side bottom left corner, use the nylon or metal spudger to lift the grille up from each of the four corners.

    • Follow the previous instruction to remove the back grille.

  2. Unscrew the two .5 mm screws that hold the sub woofer in place. Repeat the last step for the two screws on the back side. Repeat the last step for the two screws on the back side.
    • Unscrew the two .5 mm screws that hold the sub woofer in place.

    • Repeat the last step for the two screws on the back side.

  3. Remove the four screws that hold the passive radiator in place Remove the four screws that hold the passive radiator in place
    • Remove the four screws that hold the passive radiator in place

  4. Pop the Passive Radiator off.
    • Pop the Passive Radiator off.

  5. Repeat Step 2, 3 and 4 for the other passive radiator. Repeat Step 2, 3 and 4 for the other passive radiator. Repeat Step 2, 3 and 4 for the other passive radiator.
    • Repeat Step 2, 3 and 4 for the other passive radiator.

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

John Reynolds

회원 가입일: 2015년 10월 16일

2,902 평판

안내서 4개 작성하였습니다

UMass Dartmouth, Team 4-1, Catania Fall 2015 UMass Dartmouth, Team 4-1, Catania Fall 2015 회원

UMASSD-CATANIA-F15S4G1

4 회원들

안내서 12개 작성하였습니다

댓글 3개

When charging my charge 2+ 4 LED lights are blowing but 5th one is not blowing , 5th one blows when Bluetooth is on that is when speaker is on . I don't know what to do please help mail at jomonjohny140898@gmail.com

Jomon johny - 답글

댓글 쓰기

조회 통계:

24 시간 전: 6

7일 전: 22

30일 전: 58

전체 시간: 16,796