주요 콘텐츠로 건너뛰기

JBL Charge 3 Button Replacement

필요한 것

  1. JBL Charge 3 Button Replacement, Front Cover: 1 단계, 이미지 1/3 JBL Charge 3 Button Replacement, Front Cover: 1 단계, 이미지 2/3 JBL Charge 3 Button Replacement, Front Cover: 1 단계, 이미지 3/3
    • Turn your speaker upside down and insert the plastic opening tool vertically into the slit in the front cover.

    • Slowly pull the plastic opening tool outward to remove the four clips holding the covering in place.

    • Repeat this process for all four edges of the front cover.

  2. JBL Charge 3 Button Replacement: 2 단계, 이미지 1/1
    • Pull apart your cover gently from both sides and remove it from the speaker housing.

    • The inside of the front cover has holes that must match with their corresponding pins on the speaker housing for proper reassembly.

    • Removing the Front Cover does not affect the waterproof seals of the device. However, removing any further disassembly of your speaker will require removing waterproof seals and gaskets. Your device may no longer be waterproof after these have been altered.

  3. JBL Charge 3 Button Replacement, Button: 3 단계, 이미지 1/2 JBL Charge 3 Button Replacement, Button: 3 단계, 이미지 2/2
    • Use your plastic opening tool to pry around the edges of the button cover. This will begin to separate the adhesive from the cover.

    • Peel away the button cover with your hand once you have enough separated from the speaker housing to grab.

  4. JBL Charge 3 Button Replacement: 4 단계, 이미지 1/2 JBL Charge 3 Button Replacement: 4 단계, 이미지 2/2
    • Flip open the top flap on the ZIF connector.

    • Gently pull out the ZIF connector cable with tweezers.

결론

To reassemble your device, follow these instructions in reverse order.

다른 12명이 해당 안내서를 완성하였습니다.

Sunmin Yoon

회원 가입일: 10/30/18

1,793 평판

안내서 2개 작성하였습니다

Cal Poly, Team S13-G1, White Fall 2018 Cal Poly, Team S13-G1, White Fall 2018 회원

CPSU-WHITE-F18S13G1

3 회원들

안내서 26개 작성하였습니다

댓글 4개

my jbl dont turn on even its in charge it wont turn on

batteries are new but still wont wor

D- ASTRO - 답글

Where do i buy new buttons?

Thomas Bjerregaard - 답글

Could you please provide info about where to get the green board?

Alvaro Pérez Morales - 답글

Next steps are missing.

5.) What happens after the disconnecting the ZIF?

6.) a.) How do you remove the button board? Is that what needs to then be replaced?)

6.) b) Or do I need soldiering skills and learn to attach new buttons to the existing board.

Happy to learn - hoping to be pointed in the right direction...

Mark Freeman - 답글

댓글 쓰기

조회 통계:

24 시간 전: 10

7일 전: 111

30일 전: 372

전체 시간: 21,786