JBL Flip 5 Speaker Replacement - iFixit 수리 안내서

소개

Taking out the speaker for a replacement

필요한 것

1 단계 Outer Case

JBL Flip 5 Speaker Replacement, Outer Case: 1 단계, 이미지 1/2

JBL Flip 5 Speaker Replacement, Outer Case: 1 단계, 이미지 2/2

Insert the flat edge of the metal spudger underneath the corner of the outer case.
Use the spudger to pry open the plastic clips that secure the outer case.

2 단계

JBL Flip 5 Speaker Replacement: 2 단계, 이미지 1/1

Once all the clips are released, you will be able to pull up that edge of the case.

3 단계

JBL Flip 5 Speaker Replacement: 3 단계, 이미지 1/1

Once one side is released, complete the previous two steps with the other side.
This side contains the buttons, so be careful so as to not damage them while prying the case off.

4 단계

JBL Flip 5 Speaker Replacement: 4 단계, 이미지 1/2

JBL Flip 5 Speaker Replacement: 4 단계, 이미지 2/2

Once all the clips are removed, you can gently remove the outer case.
The case is now fully removed. Now a new case will be attached by putting the case into position and pushing on the clips to reattach them.

5 단계 Speaker

JBL Flip 5 Speaker Replacement, Speaker: 5 단계, 이미지 1/1

Begin by unscrewing the four 9.6 mm-long screws with the Philips #00 screwdriver.

6 단계

JBL Flip 5 Speaker Replacement: 6 단계, 이미지 1/1

Once screws are fully out make sure to carefully pull out so the wires connected don't get damaged.

7 단계

JBL Flip 5 Speaker Replacement: 7 단계, 이미지 1/1

Once you carefully lift up the speaker, gently disconnect the wire that connects the speaker to the motherboard.

8 단계

JBL Flip 5 Speaker Replacement: 8 단계, 이미지 1/1

Once connection has been disconnected you can lift the speaker completely out.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Gaurang Karpe

회원 가입일: 10/30/23

109 평판

안내서 1개 작성함

팀

UMass Dartmouth, Team 3-5, Konn Fall 2023 UMass Dartmouth, Team 3-5, Konn Fall 2023 회원

UMASSD-KONN-F23S3G5

4 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 4

7일 전: 31

30일 전: 110

전체 시간: 327