Skip to main content

소개

This guide shows you how to remove the bottom plate, this provides access to the subwoofer itself.

  1. Locate the 3 risers the hold the base plate in place
    • Locate the 3 risers the hold the base plate in place

  2. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  3. Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening  each one.
    • Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening each one.

  4. With all three loosened remove the base!
    • With all three loosened remove the base!

    • Note the not equilateral placement of the risers when replacing the base.

결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

Ryan McLeod

회원 가입일: 2010년 05월 22일

382 평판

안내서 2개 작성하였습니다

Thanks, so nice tip. I'll see if I can find a similar speaker, big hug.

durval - 답글

My speaker is broken like on the image above and it sounds horrible. Do you know where to buy similar speaker in order to replice it?

pszopa - 답글

Does anybody know, if I can get a replacement speaker for the subwoofer of the JBL 2.1. system? Thanks!

Lars -

I was unable to find a replacement for the Atlas subwoofer it uses and ended up "recycling" the whole thing :( I've since replaced it with the the Klipsch ProMedia 2.1s and love them.

Ryan McLeod -

댓글 쓰기

조회 통계:

지난 24시간: 6

지난 7일: 22

지난 30일: 111

전체 시간: 6,934