기기를 수리하세요 커뮤니티 상점

JBL Tune 510BT Faceplate Replacement

필요한 것

  1. JBL Tune 510BT Faceplate Replacement, Faceplate: 1 단계, 이미지 1/2 JBL Tune 510BT Faceplate Replacement, Faceplate: 1 단계, 이미지 2/2

    • Firmly grasp the earmuff and pull away from the center until the lip of the earmuff is disengaged.

    • Pull the earmuff towards the center of the headphones until it is free.

    번역하기

  3. JBL Tune 510BT Faceplate Replacement: 2 단계, 이미지 1/2 JBL Tune 510BT Faceplate Replacement: 2 단계, 이미지 2/2

    • Remove the three 3 mm screws using a JIS #00 screwdriver.

    번역하기

  4. JBL Tune 510BT Faceplate Replacement: 3 단계, 이미지 1/1

    • Carefully remove the faceplate by lifting it firmly.

    • Avoid rough movements, as there is a single thin wire connecting the faceplate to the internals.

    • If the repair is for the right-side driver, be mindful of the charging port, as the faceplate has a slot there for it. Lift the opposite end and back the port out.

    • To completely detach the faceplate, desolder the wires from the connections on the motherboard.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Ryan

회원 가입일: 01/30/24

513 평판

안내서 4개 작성하였습니다

배지: 8

배지 +5개 더

팀

Utah Tech University, Team 1-2, McMurrin Spring 2024 Utah Tech University, Team 1-2, McMurrin Spring 2024 회원

UTAHTECH-MCMURRIN-S24S1G2

2 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 31

전체 시간: 49