주요 콘텐츠로 건너뛰기

JBL Xtreme Cover Disassembly

필요한 것

  1. JBL Xtreme Cover Disassembly, Cover: 1 단계, 이미지 1/1
    • Locate the seams next to the 'feet' on the bottom side of the device.

  2. JBL Xtreme Cover Disassembly: 2 단계, 이미지 1/2 JBL Xtreme Cover Disassembly: 2 단계, 이미지 2/2
    • Use the metal spudger to gently pry and lift the edge of the seam. The cover is held in place with plastic snaps that will make a popping noise when disengaged. !!Start with the back half, this will expose TWO Screws that need to be removed before lifting the front half.

  3. JBL Xtreme Cover Disassembly: 3 단계, 이미지 1/2 JBL Xtreme Cover Disassembly: 3 단계, 이미지 2/2
    • For the first part of the case: gently pull back the edges of the case rotating along the hinge opposite the opening seam illustrated in the second photo. Plastic snaps hold the cover in place.

    • For the second part of the case: there are 2 screws to be removed at the seam. Once removed, the case will come off completely without forcing.

결론

To reassemble your device, follow these instructions in reverse order.

다른 14명이 해당 안내서를 완성하였습니다.

Benny Huynh

회원 가입일: 02/15/17

1,914 평판

안내서 4개 작성하였습니다

USF Tampa, Team 1-1, Sullivan Spring 2017 USF Tampa, Team 1-1, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S1G1

4 회원들

안내서 27개 작성하였습니다

댓글 5개

Can you fix my cover on speaker

c_pg08 - 답글

where can I find a new cover for xtreme 2, if possible in black?

vale0501 - 답글

If you find a place to buy a cover let me know

abjayaman -

you forgot about 2 screws

Enescu Catalin - 답글

zapomniałeś o śrubach osoby które o tym mogły nie wiedzieć mogły urwać plastikowy haczyk który utrzymuje przód

megakacper11 - 답글

댓글 쓰기

조회 통계:

24 시간 전: 7

7일 전: 40

30일 전: 190

전체 시간: 30,218