소개

The disc drive of this device can be removed and replaced with moderate ease. A spare disc drive, or DVD mechanism can be found here.

  1. Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver. Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver. Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver.
    • Remove the four 1/8-inch black machine screws using a Phillips #00 screwdriver.

  2. Remove three steel-finish, pan-head, 1/64 x 3/16" machine screws identified in the photograph, using the Phillips #0 screwdriver. Remove three steel-finish, pan-head, 1/64 x 3/16" machine screws identified in the photograph, using the Phillips #0 screwdriver.
    • Remove three steel-finish, pan-head, 1/64 x 3/16" machine screws identified in the photograph, using the Phillips #0 screwdriver.

  3. Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers. Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers. Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers.
    • Using your fingers and/or a metal spudger, gently release the plastic locking tabs of the front panel assembly from the steel enclosure while prying the front panel assembly away from the steel enclosure with your fingers.

  4. Gently remove the front panel from the steel enclosure.
    • Gently remove the front panel from the steel enclosure.

  5. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  6. Gently separate the ribbon cable from from ZIF connector on the circuit board using a metal smudger. Be careful not to scratch or damage components or features of the circuit board with the metal spudger Be careful not to scratch or damage components or features of the circuit board with the metal spudger
    • Gently separate the ribbon cable from from ZIF connector on the circuit board using a metal smudger.

    • Be careful not to scratch or damage components or features of the circuit board with the metal spudger

  7. Remove seven 1/64 x 3/16" screws from the top panel using the Phillips #0 screwdriver. Remove the top panel. Remove the top panel.
    • Remove seven 1/64 x 3/16" screws from the top panel using the Phillips #0 screwdriver.

    • Remove the top panel.

  8. After removing all screws and top panel, lift up disc drive from steel enclosure.
    • After removing all screws and top panel, lift up disc drive from steel enclosure.

  9. Turn over the disc drive to expose the connector.
    • Turn over the disc drive to expose the connector.

    • Gently remove the ribbon cable from the ZIF on the circuit board using the metal spudger.

  10. Gently pull to remove the electrical connector from disc drive. Gently pull to remove the electrical connector from disc drive. Gently pull to remove the electrical connector from disc drive.
    • Gently pull to remove the electrical connector from disc drive.

  11. Remove 2 pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver. Remove 2 pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver.
    • Remove 2 pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver.

  12. Remove 2 pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver. Remove 2 pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver.
    • Remove 2 pan-head, 1/64 x 3/16" machine screws using a Phillips #0 screwdriver.

결론

To reassemble your device, follow these instructions in reverse order.

Roxanne Shelton

회원 가입일: 2018년 09월 27일

208 평판

안내서 2개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 6

전체 시간: 97