주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

The presser foot is one of the most important parts of the sewing machine. This guide shows you how to replace different presser feet on the Juki DDL-8700.

부품

  1. Make sure to turn off the machine before replacing the presser foot.
    • Make sure to turn off the machine before replacing the presser foot.

    • Unthread the needle.

  2. Roll the hand wheel on the right side of the machine to raise the needle up. Roll the hand wheel on the right side of the machine to raise the needle up. Roll the hand wheel on the right side of the machine to raise the needle up.
    • Roll the hand wheel on the right side of the machine to raise the needle up.

  3. Pull up the switch to raise the presser foot. Pull up the switch to raise the presser foot.
    • Pull up the switch to raise the presser foot.

  4. Use a screwdriver to disassemble the presser foot. Use a screwdriver to disassemble the presser foot. Use a screwdriver to disassemble the presser foot.
    • Use a screwdriver to disassemble the presser foot.

  5. Use the screwdriver to assemble the new  presser foot. Use the screwdriver to assemble the new  presser foot. Use the screwdriver to assemble the new  presser foot.
    • Use the screwdriver to assemble the new presser foot.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Ada Lee

회원 가입일: 2017년 04월 28일

119 평판

안내서 1개 작성함

UC Davis, Team S3-G5, Coad Spring 2017 UC Davis, Team S3-G5, Coad Spring 2017 회원

UCD-COAD-S17S3G5

3 회원들

안내서 2개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 26

전체 시간: 1,431