기기를 수리하세요 커뮤니티 상점

Jura Impressa C E F models grindstone replacement

소개

Basic guide. These instructions are part of another set of instructions and are not intended to be used independently.

Intermediate step for C E F models.

  1. Jura Impressa C E F models grindstone replacement, Jura Impressa C E F models grindstone replacement: 1 단계, 이미지 1/1

    • The instructions apply to almost all devices from Jura and similar devices from AEG, Krups. The success of the repair is striking!

    • The picture shows the old grind stones on the left and the new ones on the right. They consist of a grinding ring and a grinding cone.

    • For this repair, the side parts do not necessarily have to be removed.

    번역하기

  3. Jura Impressa C E F models grindstone replacement: 2 단계, 이미지 1/2 Jura Impressa C E F models grindstone replacement: 2 단계, 이미지 2/2

    • Pull the grinder adjuster up. Note the setting, it is best to take a photo of it.

    • The screws that hold the coffee container are located in two recesses. First clean, then loosen. The protective cover over the grinder does not need to be removed.

    번역하기
결론

Follow the steps in reverse order to reassemble your device

다음 번역가들에게 특별히 감사 드립니다:

de en

100%

oldturkey03

oldturkey03님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

VauWeh

회원 가입일: 10/19/15

201,668 평판

안내서 246개 작성하였습니다

배지: 44

배지 +41개 더

팀

Repair is War on Entropy Repair is War on Entropy 회원

Community

25 회원들

안내서 1,097개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 5

전체 시간: 276