주요 콘텐츠로 건너뛰기

KRUPS Milk Foamer Type XL2000 Disassembly

필요한 것

  1. KRUPS Milk Foamer Type XL2000 Disassembly, KRUPS Milk Foamer Type XL2000 Disassembly: 1 단계, 이미지 1/2 KRUPS Milk Foamer Type XL2000 Disassembly, KRUPS Milk Foamer Type XL2000 Disassembly: 1 단계, 이미지 2/2
    • Take off the plexiglass top.

    • Remove the white milk spinner from the inside of the foamer.

  2. KRUPS Milk Foamer Type XL2000 Disassembly: 2 단계, 이미지 1/1
    • Remove the 12mm Torx screws (x3) from the bottom of the foamer using a Torx TR10 screwdriver.

  3. KRUPS Milk Foamer Type XL2000 Disassembly: 3 단계, 이미지 1/1
    • Open the bottom of the foamer.

  4. KRUPS Milk Foamer Type XL2000 Disassembly: 4 단계, 이미지 1/3 KRUPS Milk Foamer Type XL2000 Disassembly: 4 단계, 이미지 2/3 KRUPS Milk Foamer Type XL2000 Disassembly: 4 단계, 이미지 3/3
    • Take out the grey and white power cables by pulling out the slide connectors from the base.

  5. KRUPS Milk Foamer Type XL2000 Disassembly: 5 단계, 이미지 1/2 KRUPS Milk Foamer Type XL2000 Disassembly: 5 단계, 이미지 2/2
    • Remove the 16mm Torx screw in the middle of the base using a Torx TR20 screwdriver.

    • Take off the black bottom from the main body.

  6. KRUPS Milk Foamer Type XL2000 Disassembly: 6 단계, 이미지 1/1
    • Grab the power connector in the centre of the black bottom with a monkey wrench.

    • Twist the connector clockwise to remove the center power socket.

  7. KRUPS Milk Foamer Type XL2000 Disassembly: 7 단계, 이미지 1/2 KRUPS Milk Foamer Type XL2000 Disassembly: 7 단계, 이미지 2/2
    • Remove the electromotor-plug using tweezers.

    • Make sure to squeeze the small tab on the side of the plug to release it easily.

  8. KRUPS Milk Foamer Type XL2000 Disassembly: 8 단계, 이미지 1/2 KRUPS Milk Foamer Type XL2000 Disassembly: 8 단계, 이미지 2/2
    • Remove the electromotor by hand.

  9. KRUPS Milk Foamer Type XL2000 Disassembly: 9 단계, 이미지 1/2 KRUPS Milk Foamer Type XL2000 Disassembly: 9 단계, 이미지 2/2
    • Remove the rubber housing from the electromotor.

    • Remove the small rubber cap from the other end of the electromotor.

  10. KRUPS Milk Foamer Type XL2000 Disassembly: 10 단계, 이미지 1/1
    • Press on the two white clips to release the button case.

    • Push one side out first to make it easier.

  11. KRUPS Milk Foamer Type XL2000 Disassembly: 11 단계, 이미지 1/2 KRUPS Milk Foamer Type XL2000 Disassembly: 11 단계, 이미지 2/2
    • Pull out the green ribbon cable through the rubber cover.

  12. KRUPS Milk Foamer Type XL2000 Disassembly: 12 단계, 이미지 1/1
    • Pull off the rubber button caps from the button case.

  13. KRUPS Milk Foamer Type XL2000 Disassembly: 13 단계, 이미지 1/1
    • Using tweezers, pull off the rubber cover from the base.

    • Slide one side of the tweezers under the rubber to get a grip.

  14. KRUPS Milk Foamer Type XL2000 Disassembly: 14 단계, 이미지 1/3 KRUPS Milk Foamer Type XL2000 Disassembly: 14 단계, 이미지 2/3 KRUPS Milk Foamer Type XL2000 Disassembly: 14 단계, 이미지 3/3
    • Using your thumbs, push off the bottom plastic cover from the body.

    • Make sure to push and rotate frequently. Pushing on multiple points around the edge of the part allows it to come off easier and without breaking.

    • Due to this part being glued in, it takes some force to take it off.

  15. KRUPS Milk Foamer Type XL2000 Disassembly: 15 단계, 이미지 1/1
    • The product is now fully disassembled.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Joost Dommisse

회원 가입일: 03/07/18

265 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 19

전체 시간: 2,535