기기를 수리하세요 커뮤니티 상점

KYVOL CYBOVAC E20 Front Bumper Replacement

소개

The Kyvol Cybovac E20 contains a front bumper with sensors to prevent the vacuum from hitting walls or furniture. This bumper can become obstructed by debris, so try cleaning it before anything else. If the problem persists, use this guide to replace the broken front bumper.

필요한 것

  1. KYVOL CYBOVAC E20 Front Bumper Replacement, Front Bumper: 1 단계, 이미지 1/1

    • Start with the vacuum on a flat surface.

    • The power button should be on the side closest to you.

    편집

  3. KYVOL CYBOVAC E20 Front Bumper Replacement: 2 단계, 이미지 1/2 KYVOL CYBOVAC E20 Front Bumper Replacement: 2 단계, 이미지 2/2

    • Flip the vacuum over so the bottom is facing up.

    • The dust bin should be on the side furthest from you.

    • Remove the eight 1 mm screws holding the bumper in place using a Phillips #00 screwdriver.

    편집

  4. KYVOL CYBOVAC E20 Front Bumper Replacement: 3 단계, 이미지 1/2 KYVOL CYBOVAC E20 Front Bumper Replacement: 3 단계, 이미지 2/2

    • Remove both sides of the bumper and replace with new ones.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Brooke Hernandez

회원 가입일: 02/09/23

327 평판

안내서 2개 작성하였습니다

배지: 7

배지 +4개 더

팀

University of North Texas, Team 2-5, Saru Jimmy Spring 2023 University of North Texas, Team 2-5, Saru Jimmy Spring 2023 회원

UNT-SARU JIMMY-S23S2G5

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 14

전체 시간: 225