기기를 수리하세요 커뮤니티 상점

KYVOL CYBOVAC E20 Main Brush Replacement

소개

The Kyvol Cybovac E20 has a main rolling brush that may stop functioning over time from use. The brush should be taken out and cleaned, but if this does not work, the brush may be broken. If your vacuum is not cleaning well, use this guide to replace a broken main brush.

  1. KYVOL CYBOVAC E20 Main Brush Replacement, Main Brush: 1 단계, 이미지 1/1

    • Turn vacuum off and lay on flat surface.

    편집

  2. KYVOL CYBOVAC E20 Main Brush Replacement: 2 단계, 이미지 1/2 KYVOL CYBOVAC E20 Main Brush Replacement: 2 단계, 이미지 2/2

    • Turn vacuum over and identify the main brush compartment.

    편집

  4. KYVOL CYBOVAC E20 Main Brush Replacement: 3 단계, 이미지 1/1

    • Take off the orange cover guarding the brush

    편집

  5. KYVOL CYBOVAC E20 Main Brush Replacement: 4 단계, 이미지 1/1

    • Remove the main brush from the vacuum by pulling it out.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Hailee Ledgerwood

회원 가입일: 02/09/23

109 평판

안내서 1개 작성함

배지: 3

팀

University of North Texas, Team 2-5, Saru Jimmy Spring 2023 University of North Texas, Team 2-5, Saru Jimmy Spring 2023 회원

UNT-SARU JIMMY-S23S2G5

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 7

전체 시간: 139