기기를 수리하세요 커뮤니티 상점

Kambrook 600W Power Drive Blender Disassembly

필요한 것

  1. Kambrook 600W Power Drive Blender Disassembly, Kambrook 600W Power Drive Blender Disassembly: 1 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly, Kambrook 600W Power Drive Blender Disassembly: 1 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly, Kambrook 600W Power Drive Blender Disassembly: 1 단계, 이미지 3/3

    • Firstly, take off lid by twisting anti-clockwise.

    • Remove the glass jar from the blender base by again twisting anti-clockwise.

    편집

  2. Kambrook 600W Power Drive Blender Disassembly: 2 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly: 2 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly: 2 단계, 이미지 3/3

    • The blender blade is attached to a base component at the bottom of the blender jar.

    • To remove the blade, simply twist the attachment according to the direction written, in this case, turning anti-clockwise.

    • The blade could be then easily taken out from the jar, if difficulties occur at this stage, simply adjust the blade's angle when removing so.

    편집

  3. Kambrook 600W Power Drive Blender Disassembly: 3 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly: 3 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly: 3 단계, 이미지 3/3

    • Remove four screws from the base of the blender

    • Take out the ventilation opening from the base. Keep screws aside.

    편집

  4. Kambrook 600W Power Drive Blender Disassembly: 4 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly: 4 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly: 4 단계, 이미지 3/3

    • The clutch is attached to the bottom of the blender. This can be twisted out directly with hand.

    • The disk attached inside the clutch can be pulled out after the clutch is removed from the blender bottom.

    편집

  6. Kambrook 600W Power Drive Blender Disassembly: 5 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly: 5 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly: 5 단계, 이미지 3/3

    • This little component is used to stabilise wires. It can be taken out after cutting the wires.

    편집

  7. Kambrook 600W Power Drive Blender Disassembly: 6 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly: 6 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly: 6 단계, 이미지 3/3

    • Lift out the major electronic part of the blender.

    • Cut off two pieces of wires, then take out the mini light bulb.

    • This is how the blender base should look like at the moment.

    편집

  8. Kambrook 600W Power Drive Blender Disassembly: 7 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly: 7 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly: 7 단계, 이미지 3/3

    • Unscrew the two screws from both sides of the clasp to detach all component, this includes the motor of the blender

    편집

  9. Kambrook 600W Power Drive Blender Disassembly: 8 단계, 이미지 1/3 Kambrook 600W Power Drive Blender Disassembly: 8 단계, 이미지 2/3 Kambrook 600W Power Drive Blender Disassembly: 8 단계, 이미지 3/3

    • Insert wisdom here.

    편집

  10. Kambrook 600W Power Drive Blender Disassembly: 9 단계, 이미지 1/2 Kambrook 600W Power Drive Blender Disassembly: 9 단계, 이미지 2/2

    • To take out the back of the of blender speed dial, unscrew two screws that are located opposite each other.

    편집

  11. Kambrook 600W Power Drive Blender Disassembly: 10 단계, 이미지 1/2 Kambrook 600W Power Drive Blender Disassembly: 10 단계, 이미지 2/2

    • After taking out the back of the speed dial, the dial will fall out itself.

    • There are three individual pieces that make up the speed dial: the ring, the metal and plastic casting.

    편집

  12. Kambrook 600W Power Drive Blender Disassembly: 11 단계, 이미지 1/2 Kambrook 600W Power Drive Blender Disassembly: 11 단계, 이미지 2/2

    • The final disassembly, with all the blender parts and screws, will look like this.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Angel Lin

회원 가입일: 10/13/18

193 평판

안내서 1개 작성함

배지: 1

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 14

30일 전: 79

전체 시간: 4,569