소개

Use this guide to replace a worn drive belt in a Kenmore 110 Series Washing Machine.

부품

부품은 필요하지 않습니다.

  1. To avoid risk of electric shock, unplug the washing machine.
    • To avoid risk of electric shock, unplug the washing machine.

    • Lay the washing machine on its back.

    댓글 쓰기

  2. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
  3. Using a 5/16" socket wrench, remove both screws from the belt cover.
    • Using a 5/16" socket wrench, remove both screws from the belt cover.

    • Remove the belt cover from the washer.

    댓글 쓰기

    • Using a 1/2" socket, remove the bolt securing the drive pulley.

    • Remove the drive pulley and belt.

    • When installing a new belt, wrap the belt around both the motor and drive pulleys before reinstalling the drive pulley.

    I have difficulty to remove the bolt suring the pulley. Is there any tricky to move the bolt?

    John Wang - 답글

    need to remove shaft off pulley

    Valery Ryz -

    I have a very old Kenmore Washer. The belt is loose but not broken. How do I tighten?

    teedle54 - 답글

결론

To reassemble your device, follow these instructions in reverse order.

다른 10명이 해당 안내서를 완성하였습니다.

Robert Trout

회원 가입일: 2012년 09월 26일

792 평판

안내서 5개 작성하였습니다

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 회원

CPSU-FORTE-F12S15G43

5 회원들

안내서 5개 작성하였습니다

What would be reason that rinse cycle doesn't spin and it leaks

lauraleahenquinette - 답글

댓글 쓰기

조회 통계:

지난 24시간: 31

지난 7일: 208

지난 30일: 968

전체 시간: 73,850