기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Kenmore 110 Series Washing Machine Water Pump Replacement

소개

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

필요한 것

  1. Kenmore 110 Series Washing Machine Water Pump Replacement, Water Pump: 1 단계, 이미지 1/1

    • Unplug the washing machine!

    • Carefully lay washing machine on its back.

    번역하기

  3. Kenmore 110 Series Washing Machine Water Pump Replacement: 2 단계, 이미지 1/3 Kenmore 110 Series Washing Machine Water Pump Replacement: 2 단계, 이미지 2/3 Kenmore 110 Series Washing Machine Water Pump Replacement: 2 단계, 이미지 3/3

    • Carefully remove both wire harnesses connected to the pump.

    • Squeeze and pull back hose clamp.

    • Twist drain hose off of pump.

    • Using a 1/4" socket wrench, remove the three mounting screws.

    • Pull the pump out of place.

    • Pulling the pump away takes a little force.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 14명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Robert Trout

회원 가입일: 09/26/12

1,234 평판

안내서 5개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 회원

CPSU-FORTE-F12S15G43

5 회원들

안내서 11개 작성하였습니다

댓글 9개

please provide info on how to test the water pump once it's removed...

Oscar Ramos - 답글

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - 답글

My clothes are still really wet.

Tracy Schultz - 답글

Washer doesn't move doesn't do any thing it just hummus won't drain water

Hector Rios - 답글

댓글 쓰기

조회 통계:

24 시간 전: 10

7일 전: 90

30일 전: 349

전체 시간: 58,681