주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Kenwood DNX571HD LCD Touch Screen Replacement

필요한 것

  1. Kenwood DNX571HD LCD Touch Screen Replacement, LCD Touch Screen: 1 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement, LCD Touch Screen: 1 단계, 이미지 2/2
    • Turn off the stereo and remove from the vehicle before starting.

    • Unscrew the four 3.5mm side screws with a Phillips #1 screwdriver.

    • There are two screws per side.

  2. Kenwood DNX571HD LCD Touch Screen Replacement: 2 단계, 이미지 1/3 Kenwood DNX571HD LCD Touch Screen Replacement: 2 단계, 이미지 2/3 Kenwood DNX571HD LCD Touch Screen Replacement: 2 단계, 이미지 3/3
    • Use a spudger to unhook the plastic clips on the sides and top of the front panel. There are two clips on each side and one clip on the top.

    • Place the spudger between the plastic tab and the metal case and gently lift the spudger away from the case.

  3. Kenwood DNX571HD LCD Touch Screen Replacement: 3 단계, 이미지 1/1
    • Pull the top of the front panel out and down to remove front panel.

    • Remove the front panel gently so as not to damage the ribbon cables behind it.

  4. Kenwood DNX571HD LCD Touch Screen Replacement: 4 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 4 단계, 이미지 2/2
    • Flip up the black clasp with the spudger to disconnect the small white ribbon cable from the main board.

  5. Kenwood DNX571HD LCD Touch Screen Replacement: 5 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 5 단계, 이미지 2/2
    • Flip up the black clasp with the spudger to disconnect the large white ribbon cable from the main board.

  6. Kenwood DNX571HD LCD Touch Screen Replacement: 6 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 6 단계, 이미지 2/2
    • Flip up the black clasp with the spudger to disconnect the small white ribbon cable from the vertical board.

    • Carefully pull the ribbon from the clasp with the spudger.

  7. Kenwood DNX571HD LCD Touch Screen Replacement: 7 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 7 단계, 이미지 2/2
    • Flip up the black clasp with the spudger to disconnect the large orange ribbon cable from the main board.

    • Carefully pull the ribbon from the clasp with the spudger.

  8. Kenwood DNX571HD LCD Touch Screen Replacement: 8 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 8 단계, 이미지 2/2
    • Push out the black clasp with the spudger to disconnect the small orange ribbon cable from the main board.

    • Gently push the ribbon out of the clasp with the spudger.

  9. Kenwood DNX571HD LCD Touch Screen Replacement: 9 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 9 단계, 이미지 2/2
    • Using a pair of tweezers, gently pull up on the connector for the power cable to disconnect it from the main board.

  10. Kenwood DNX571HD LCD Touch Screen Replacement: 10 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 10 단계, 이미지 2/2
    • Unscrew the two 4mm screws holding down the board that is standing vertically with a Phillips #1 screwdriver.

    • Pull up on the board to remove it.

  11. Kenwood DNX571HD LCD Touch Screen Replacement: 11 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 11 단계, 이미지 2/2
    • Unscrew the four 5.5mm screws with a JIS #00 screwdriver.

    • Unscrew the 4mm screw with a Phillips #1 screwdriver.

    • Remove the disconnected circuit board.

  12. Kenwood DNX571HD LCD Touch Screen Replacement: 12 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 12 단계, 이미지 2/2
    • Unscrew the four 4mm screws on the main board with a Phillips #1 screwdriver.

    • Gently lift the board out of the casing.

    • Unscrew the 5.5mm screw on the metal plate with a JIS #00 screwdriver.

  13. Kenwood DNX571HD LCD Touch Screen Replacement: 13 단계, 이미지 1/1
    • Carefully remove the tape attaching the power cable to the metal plate.

  14. Kenwood DNX571HD LCD Touch Screen Replacement: 14 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 14 단계, 이미지 2/2
    • Use the spudger to unhook the metal tabs and detach the metal plate from the plastic housing.

    • Place the spudger between the metal tab and the plastic case and gently lift the spudger away from the case.

  15. Kenwood DNX571HD LCD Touch Screen Replacement: 15 단계, 이미지 1/2 Kenwood DNX571HD LCD Touch Screen Replacement: 15 단계, 이미지 2/2
    • Gently press the front of the screen to detach it from the plastic housing.

    • When removing the screen, gently flex out the plastic housing to help get the display past the plastic latch.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Wendy Zaballos

회원 가입일: 09/17/18

952 평판

안내서 6개 작성하였습니다

Washington State, Team S1-G1, Hope Fall 2018 Washington State, Team S1-G1, Hope Fall 2018 회원

WSU-HOPE-F18S1G1

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 23

30일 전: 70

전체 시간: 9,151