기기를 수리하세요 커뮤니티 상점

Keurig B70 Platinum Base Replacement

소개

Cracked base? Or maybe you feel like taking it out for a thorough wash?

This guide will show you how to remove the plastic base surrounding the Keurig B70 Platinum device.

You will need a Phillips #2 screwdriver to complete this guide.

필요한 것

  1. Keurig B70 Platinum Base Replacement, Base: 1 단계, 이미지 1/2 Keurig B70 Platinum Base Replacement, Base: 1 단계, 이미지 2/2

    • Turn off and unplug the Keurig before starting.

    • Turn the Keurig upside down so the metal base is exposed.

    • Remove the five 12.0 mm screws.

    편집

  2. Keurig B70 Platinum Base Replacement: 2 단계, 이미지 1/2 Keurig B70 Platinum Base Replacement: 2 단계, 이미지 2/2

    • Lift the metal plate off the Keurig and hang it over the side of the device.

    • Be careful! The metal plate is sharp!

    • There are wires connected to the metal plate. Make sure the wires are not in the way of the internal components.

    편집

  3. Keurig B70 Platinum Base Replacement: 3 단계, 이미지 1/3 Keurig B70 Platinum Base Replacement: 3 단계, 이미지 2/3 Keurig B70 Platinum Base Replacement: 3 단계, 이미지 3/3

    • Remove the three 11.0 mm screws located on the upper left side of the base from within the tub-looking area.

    • Pull out the red and white wires and put it off to the side of the Keurig.

    편집

  5. Keurig B70 Platinum Base Replacement: 4 단계, 이미지 1/3 Keurig B70 Platinum Base Replacement: 4 단계, 이미지 2/3 Keurig B70 Platinum Base Replacement: 4 단계, 이미지 3/3

    • Pull out the water collector by gripping it tightly and lifting upwards.

    편집

  6. Keurig B70 Platinum Base Replacement: 5 단계, 이미지 1/3 Keurig B70 Platinum Base Replacement: 5 단계, 이미지 2/3 Keurig B70 Platinum Base Replacement: 5 단계, 이미지 3/3

    • Lift the tube, connected to the tank, off the black plastic hook and leave it off to the side of the hook.

    편집

  7. Keurig B70 Platinum Base Replacement: 6 단계, 이미지 1/3 Keurig B70 Platinum Base Replacement: 6 단계, 이미지 2/3 Keurig B70 Platinum Base Replacement: 6 단계, 이미지 3/3

    • Pull the power cord out from the plastic holder located near the water tank.

    • This step requires a bit of force so don't be afraid to pull harder!

    편집

  8. Keurig B70 Platinum Base Replacement: 7 단계, 이미지 1/2 Keurig B70 Platinum Base Replacement: 7 단계, 이미지 2/2

    • Remove the six 13.0 mm screws.

    편집

  9. Keurig B70 Platinum Base Replacement: 8 단계, 이미지 1/3 Keurig B70 Platinum Base Replacement: 8 단계, 이미지 2/3 Keurig B70 Platinum Base Replacement: 8 단계, 이미지 3/3

    • Lift the metal base and hover it over the opening of the black plastic base.

    • Carefully raise the plastic base over the metal base until it is removed.

    • Make sure to pull the power cord through the base as well!

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Steven Tran

회원 가입일: 10/14/18

329 평판

안내서 2개 작성하였습니다

배지: 6

배지 +3개 더

팀

UW Tacoma, Team S1-G6, Rose Fall 2018 UW Tacoma, Team S1-G6, Rose Fall 2018 회원

UWT-ROSE-F18S1G6

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 548