주요 콘텐츠로 건너뛰기

Keyboard

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. Keyboard, key removal: 1 단계, 이미지 1/3 Keyboard, key removal: 1 단계, 이미지 2/3 Keyboard, key removal: 1 단계, 이미지 3/3
    • To get to the screws beneath the keyboard you need to take some keys off. You can use either an opening tool or an opening pick. The first picture shows how it should look like with all the necessary keys off (12 in total).

    • The four longer keys from the fingerboard are to be handled from the left side to get them off.

    • The eight smaller keys need to be levered from the bottom up.

  2. Keyboard, removing scissors mechanisms: 2 단계, 이미지 1/2 Keyboard, removing scissors mechanisms: 2 단계, 이미지 2/2
    • The scissor mechanism of the eight small keys are obstructing the underlying screws.

    • By using again an opening tool or opening pick these can be snapped off easily.

    • When reassembling be sure to place them in with the correct side facing upwards.

  3. Keyboard, unscrew keyboard: 3 단계, 이미지 1/3 Keyboard, unscrew keyboard: 3 단계, 이미지 2/3 Keyboard, unscrew keyboard: 3 단계, 이미지 3/3
    • Loosen those 12 screws with a Phillips #00 screwdriver.

    • Then just pull off the four rotary knobs and the volume knob.

    • Now it is possible to slightly lift the keyboard and set it back.

결론

To reassemble your device, follow these instructions in reverse order.

Tobias Isakeit

회원 가입일: 03/31/14

117,763 평판

안내서 188개 작성하였습니다

Master Techs Master Techs 회원

Community

322 회원들

안내서 2,545개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 12

30일 전: 24

전체 시간: 686