주요 콘텐츠로 건너뛰기

KidzLane Walkie-Talkie Press-to-speak button Replacement

필요한 것

  1. KidzLane Walkie-Talkie Press-to-speak button Replacement, Press-to-speak button: 1 단계, 이미지 1/1
    • Place the Walkie-Talkie on a flat surface-preferably a table or a desk.

    • Flip the device over to where you see four screws in each corner.

    • Make sure you take out the batteries before proceeding.

  2. KidzLane Walkie-Talkie Press-to-speak button Replacement: 2 단계, 이미지 1/2 KidzLane Walkie-Talkie Press-to-speak button Replacement: 2 단계, 이미지 2/2
    • Using your Phillips head screwdriver, unscrew all four 4mm screws from each corner.

  3. KidzLane Walkie-Talkie Press-to-speak button Replacement: 3 단계, 이미지 1/1
    • Once you have unscrewed all four corners, open the device so it will be in two parts.

    • As you're opening the inside of the Walkie-Talkie, don't break off any wires within the device.

    • Taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).

    • Separate these screws from the other four since they are different sizes.

  4. KidzLane Walkie-Talkie Press-to-speak button Replacement: 4 단계, 이미지 1/2 KidzLane Walkie-Talkie Press-to-speak button Replacement: 4 단계, 이미지 2/2
    • Take the circuit board out of the plastic casing.

    • Use the soldering device to iron the silver box (press-to-speak button), and then remove it from the circuit board.

결승점

다른 2명이 해당 안내서를 완성하였습니다.

Amin

회원 가입일: 02/13/16

642 평판

안내서 5개 작성하였습니다

IUPUI, Team 1-1, Wilson Spring 2016 IUPUI, Team 1-1, Wilson Spring 2016 회원

IUPUI-WILSON-S16S1G1

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 9

전체 시간: 896