주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Use the flat end of a spudger to peel the ambient light sensor cable off of the frame. You will need to peel up the silver tape in the cable's lower right bend. The silver tape under the lower left bend of the cable does not need to come up with it. You will need to peel up the silver tape in the cable's lower right bend. The silver tape under the lower left bend of the cable does not need to come up with it.
    • Use the flat end of a spudger to peel the ambient light sensor cable off of the frame.

    • You will need to peel up the silver tape in the cable's lower right bend. The silver tape under the lower left bend of the cable does not need to come up with it.

  2. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  3. Use the flat end of a spudger to peel up the silver tape securing the antenna cable.
    • Use the flat end of a spudger to peel up the silver tape securing the antenna cable.

  4. Remove the five 3.6 mm Phillips #00 screws securing the frame and ambient light sensor.
    • Remove the five 3.6 mm Phillips #00 screws securing the frame and ambient light sensor.

결론

To reassemble your device, follow these instructions in reverse order.

Phillip Takahashi

회원 가입일: 2011년 08월 22일

77,512 평판

안내서 87개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 522