주요 콘텐츠로 건너뛰기

소개

Replacement guide for the micro USB charging port on a Kindle Fire HDX 7” tablet.

The home button and micro USB are part of the same ribbon cable and are replaced at the same time.

  1. Kindle Fire HDX 7" Micro USB Charging Port Replacement, Speaker Bezel: step 1, image 1 of 3 Kindle Fire HDX 7" Micro USB Charging Port Replacement, Speaker Bezel: step 1, image 2 of 3 Kindle Fire HDX 7" Micro USB Charging Port Replacement, Speaker Bezel: step 1, image 3 of 3
    • Insert an opening pick underneath the speaker bezel, and slide it along the perimeter to separate it from the tablet.

    • The adhesive is strong and may require an iOpener, or heat gun, to soften.

  2. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 2, image 1 of 1
    • Remove the speaker bezel.

  3. Kindle Fire HDX 7" Micro USB Charging Port Replacement, Rear Panel: step 3, image 1 of 1
    • Remove the six pink 3mm T3 Torx screws from the back case.

  4. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 4, image 1 of 2 Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 4, image 2 of 2
    • Wedge opening picks around the perimeter between the display and back case.

    • Work the opening picks around the perimeter until the two halves disengage from each other.

    • Don't completely separate as the display ribbon cable still connects the two.

  5. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 5, image 1 of 1
    • Use the flat end of a spudger to pry up and disconnect the rear panel press-fit connector from the motherboard.

    • There may be a glue strip between the battery and the outside case. Gently pry the case open and use the flat end of a spudger to separate the glue strip.

  6. Kindle Fire HDX 7" Micro USB Charging Port Replacement, Micro USB Charging Port: step 7, image 1 of 1
    • Remove the four 2.3mm T5 Torx screws from the micro USB port and power button assembly.

  7. Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 8, image 1 of 2 Kindle Fire HDX 7" Micro USB Charging Port Replacement: step 8, image 2 of 2
    • Pry up the ribbon cable from the rear panel with the flat end of a spudger.

    • Remove the micro USB port and power button ribbon cable.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Blake Klein

회원 가입일: 2017년 01월 29일

65,160 평판

안내서 55개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 7

7일 전: 43

30일 전: 167

전체 시간: 4,792