주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Should the user wish to replace the casing or access the further internals, this guide will be useful.

  1. With the small plastic opening tool, undo the plastic clips around the back lid. With the small plastic opening tool, undo the plastic clips around the back lid. With the small plastic opening tool, undo the plastic clips around the back lid.
    • With the small plastic opening tool, undo the plastic clips around the back lid.

  2. Gently lift the bottom and pull as the rest of the plastic guides are on a track. Gently lift the bottom and pull as the rest of the plastic guides are on a track.
    • Gently lift the bottom and pull as the rest of the plastic guides are on a track.

  3. Remove these five 2 mm screws using a Phillips #00 screwdriver. Remove these five 2 mm screws using a Phillips #00 screwdriver. Remove these five 2 mm screws using a Phillips #00 screwdriver.
    • Remove these five 2 mm screws using a Phillips #00 screwdriver.

  4. Using the flat end of your spudger, gently pry the battery up and remove it. Using the flat end of your spudger, gently pry the battery up and remove it. Using the flat end of your spudger, gently pry the battery up and remove it.
    • Using the flat end of your spudger, gently pry the battery up and remove it.

  5. Remove the six 4 mm screws in order to access the front plate. Use a  Phillips #00 screwdriver. Remove the six 4 mm screws in order to access the front plate. Use a  Phillips #00 screwdriver.
    • Remove the six 4 mm screws in order to access the front plate. Use a Phillips #00 screwdriver.

  6. Use a plastic opening tool to pry the top three sides of the bezel. Since there is glue under the bezel,  gently pivot the face at the bottom off the Kindle and slide the clips out. The clips can be easily bent. Do not try to force the clips out. If you do bend some, they can be bent back. The clips can be easily bent. Do not try to force the clips out. If you do bend some, they can be bent back.
    • Use a plastic opening tool to pry the top three sides of the bezel. Since there is glue under the bezel, gently pivot the face at the bottom off the Kindle and slide the clips out.

    • The clips can be easily bent. Do not try to force the clips out. If you do bend some, they can be bent back.

  7. Use your Phillips #00 srewdriver to remove the indicated screws.
    • Use your Phillips #00 srewdriver to remove the indicated screws.

    • There are three pairs of screws that are each different. The screws on the top corners are 4 mm #00 Phillips screws, the screws on the bottom corners are 2 mm #00 Phillips screws, and the black bottom center screws are 6 mm #00 Phillips screws.

  8. With the screws removed, gently remove the case from the internals. With the screws removed, gently remove the case from the internals.
    • With the screws removed, gently remove the case from the internals.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Adam Yerly

회원 가입일: 2015년 01월 20일

1,646 평판

안내서 7개 작성하였습니다

USF Tampa, Team 19-5, Blackwell Winter 2015 USF Tampa, Team 19-5, Blackwell Winter 2015 회원

USFT-BLACKWELL-W15S19G5

3 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 10

전체 시간: 693