주요 콘텐츠로 건너뛰기

Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly

필요한 것

  1. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly, Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 1 단계, 이미지 1/2 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly, Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 1 단계, 이미지 2/2
    • At the bottom of the kettle pot, remove two 10 mm screws with a Phillips #2 screwdriver.

  2. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 2 단계, 이미지 1/3 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 2 단계, 이미지 2/3 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 2 단계, 이미지 3/3
    • Open the lid of the kettle

    • Remove two 12 mm screws at the top of the handle with a Phillips #2 screwdriver.

  3. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 3 단계, 이미지 1/2 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 3 단계, 이미지 2/2
    • The exterior of the plastic handle and lid can now be removed from the kettle to expose the electric components.

    • The plastic cover may need a little wiggling to pop off.

  4. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 4 단계, 이미지 1/3 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 4 단계, 이미지 2/3 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 4 단계, 이미지 3/3
    • Turn the kettle over to the back of the handle.

    • Remove three 10 mm screws connecting the switch circuit to the heating element with a Phillips #2 screwdriver.

    • The heating element should disconnect, allowing you to remove it.

  5. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 5 단계, 이미지 1/2 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 5 단계, 이미지 2/2
    • The pronged power element, removed in Step 4, will have a dry-heating safety feature on the opposite side.

    • This switch turns off the kettle once steam is detected, indicating the water is boiling.

    • This is the boil dry protection switch.

  6. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 6 단계, 이미지 1/2 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 6 단계, 이미지 2/2
    • The inner heating element can now be removed after the completion of Step 4.

  7. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 7 단계, 이미지 1/3 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 7 단계, 이미지 2/3 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 7 단계, 이미지 3/3
    • Looking at the bottom of the base, remove two 12 mm screws from the base with a Triangle #2 screwdriver.

    • You are now able to take the black plastic cover off and remove the cord.

결론

To reassemble your device, follow these instructions in reverse order.

첨부 문서

Amanda Yan

회원 가입일: 09/14/22

195 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 6

30일 전: 26

전체 시간: 388