주요 콘텐츠로 건너뛰기

KitchenAid KHM512ER Power Cord Replacement

필요한 것

  1. KitchenAid KHM512ER Power Cord Replacement, Power Cord: 1 단계, 이미지 1/2 KitchenAid KHM512ER Power Cord Replacement, Power Cord: 1 단계, 이미지 2/2
    • Insert the back of a plastic opening tool into one of the beater holes

    • Apply force to pull the circular plastic part off.

    • If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.

  2. KitchenAid KHM512ER Power Cord Replacement: 2 단계, 이미지 1/3 KitchenAid KHM512ER Power Cord Replacement: 2 단계, 이미지 2/3 KitchenAid KHM512ER Power Cord Replacement: 2 단계, 이미지 3/3
    • Use a plastic opening tool to remove the speed knob.

    • Pop up the panel with a plastic opening tool.

    • Use a plastic opening tool to pry the white plastic switch assembly out.

  3. KitchenAid KHM512ER Power Cord Replacement: 3 단계, 이미지 1/2 KitchenAid KHM512ER Power Cord Replacement: 3 단계, 이미지 2/2
    • Use a Phillips 2 screwdriver to remove the two 20.0mm screws that hold the bottom plastic piece.

    • Your screwdriver may not be long or narrow enough to reach the screws in these holes. If that's the case, use another screwdriver.

    • Remove the bottom plastic piece using a plastic opening tool.

  4. KitchenAid KHM512ER Power Cord Replacement: 4 단계, 이미지 1/3 KitchenAid KHM512ER Power Cord Replacement: 4 단계, 이미지 2/3 KitchenAid KHM512ER Power Cord Replacement: 4 단계, 이미지 3/3
    • Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place.

    • Use your hands to remove the motor assembly and circuit board.

  5. KitchenAid KHM512ER Power Cord Replacement: 5 단계, 이미지 1/3 KitchenAid KHM512ER Power Cord Replacement: 5 단계, 이미지 2/3 KitchenAid KHM512ER Power Cord Replacement: 5 단계, 이미지 3/3
    • Firmly grip the circuit board, and using pliers, remove the black and white power cord connectors from the circuit board.

    • Some force may be required. Be careful not to cut yourself on any electrical components.

  6. KitchenAid KHM512ER Power Cord Replacement: 6 단계, 이미지 1/3 KitchenAid KHM512ER Power Cord Replacement: 6 단계, 이미지 2/3 KitchenAid KHM512ER Power Cord Replacement: 6 단계, 이미지 3/3
    • Using a plastic opening tool, remove the white plastic clip on the inside of the bottom plastic piece.

    • Once it's loose, remove it with your fingers.

    • Pull the power cord through the hole.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Brad Daniels

회원 가입일: 02/10/16

621 평판

안내서 3개 작성하였습니다

USF Tampa, Team 2-3, Sullivan Spring 2016 USF Tampa, Team 2-3, Sullivan Spring 2016 회원

USFT-SULLIVAN-S16S2G3

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 11

30일 전: 43

전체 시간: 3,569