기기를 수리하세요 커뮤니티 상점

KitchenAid KSM150PSER Power Cord Replacement

소개

If your device is not turning on, it may be the result of a faulty power cord. This guide demonstrates how to replace it.

필요한 것

  1. KitchenAid KSM150PSER Power Cord Replacement, Power Cord: 1 단계, 이미지 1/2 KitchenAid KSM150PSER Power Cord Replacement, Power Cord: 1 단계, 이미지 2/2

    • Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.

    • The back cover is now free. Remove it by pulling back and up on the cover.

    편집

  2. KitchenAid KSM150PSER Power Cord Replacement: 2 단계, 이미지 1/2 KitchenAid KSM150PSER Power Cord Replacement: 2 단계, 이미지 2/2

    • Using a Phillips #2 screwdriver, remove the 5mm screws holding the trimband to the top housing by rotating them counterclockwise.

    • Pull the trimband off the housing by grabbing each side and pulling it off the front.

    편집

  4. KitchenAid KSM150PSER Power Cord Replacement: 3 단계, 이미지 1/2 KitchenAid KSM150PSER Power Cord Replacement: 3 단계, 이미지 2/2

    • Using a Phillips #2 screwdriver, remove the 12mm screw holding the grounding wire in place by rotating it counterclockwise.

    • Using pliers or tweezers, remove the connectors attached to the white and black wires.

    편집

  5. KitchenAid KSM150PSER Power Cord Replacement: 4 단계, 이미지 1/2 KitchenAid KSM150PSER Power Cord Replacement: 4 단계, 이미지 2/2

    • Using a screwdriver, pull the cord string relief out of the mixer by putting it behind the cord and pulling away from the mixer until it is free.

    • Remove the cord from the mixer body.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Max Prohorov

회원 가입일: 01/24/18

109 평판

안내서 1개 작성함

배지: 2

팀

Cal Poly, Team S2-G5, Livingston Winter 2018 Cal Poly, Team S2-G5, Livingston Winter 2018 회원

CPSU-LIVINGSTON-W18S2G5

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 9

30일 전: 53

전체 시간: 3,966