주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Take out the screw which holds on the silver band using a Phillips #2 screwdriver.
    • Take out the screw which holds on the silver band using a Phillips #2 screwdriver.

    • Remove the silver band.

  2. Remove the four Phillips #2 screws located around the mixer where the band was removed.
    • Remove the four Phillips #2 screws located around the mixer where the band was removed.

    • This picture only shows two of the screw that you need to remove. The other two are on the exact opposite side of the mixer.

  3. Remove the top of the mixer to reveal the inner parts.
    • Remove the top of the mixer to reveal the inner parts.

  4. Remove the 4 Phillips #2 screws connecting the black housing cover to the device.
    • Remove the 4 Phillips #2 screws connecting the black housing cover to the device.

    • Only one of the screws is seen in the picture. The other three are also located around the black housing cover.

  5. Take off the black housing cover.
    • Take off the black housing cover.

  6. Remove the Worm Gear.
    • Remove the Worm Gear.

    • The Worm Gear is the part that is lying horizontal.

    • Remember to apply food safe grease onto your new replacement part before assembling the device back together.

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Luke

회원 가입일: 2016년 04월 11일

1,075 평판

안내서 5개 작성하였습니다

Cal Poly, Team 25-4, Maness Spring 2016 Cal Poly, Team 25-4, Maness Spring 2016 회원

CPSU-MANESS-S16S25G4

4 회원들

안내서 14개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 12

7일 전: 61

30일 전: 276

전체 시간: 6,145