기기를 수리하세요 커뮤니티 상점

Kodak EasyShare Z1015 IS Back Cover Replacement

소개

This tutorial demonstrates how to remove the back cover from the camera.

필요한 것

  1. Kodak EasyShare Z1015 IS Back Cover Replacement, Battery: 1 단계, 이미지 1/2 Kodak EasyShare Z1015 IS Back Cover Replacement, Battery: 1 단계, 이미지 2/2

    • Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open.

    번역하기

  2. Kodak EasyShare Z1015 IS Back Cover Replacement: 2 단계, 이미지 1/1

    • Next, press down on the red lever which holds the battery in place.

    번역하기

  3. Kodak EasyShare Z1015 IS Back Cover Replacement: 3 단계, 이미지 1/2 Kodak EasyShare Z1015 IS Back Cover Replacement: 3 단계, 이미지 2/2

    • Once the battery has popped out of the compartment, simply pull it out of the camera.

    번역하기

  5. Kodak EasyShare Z1015 IS Back Cover Replacement, Back Cover: 4 단계, 이미지 1/3 Kodak EasyShare Z1015 IS Back Cover Replacement, Back Cover: 4 단계, 이미지 2/3 Kodak EasyShare Z1015 IS Back Cover Replacement, Back Cover: 4 단계, 이미지 3/3

    • Make sure that the lens cover is on the Kodak EasyShare whenever working with one of these guides.

    • Also, make sure to keep track of the screws you remove throughout these step by step guides. Losing a screw could inhibit the ability to reassemble the camera.

    • Begin by removing the first screw located on the back of the camera.

    번역하기

  6. Kodak EasyShare Z1015 IS Back Cover Replacement: 5 단계, 이미지 1/2 Kodak EasyShare Z1015 IS Back Cover Replacement: 5 단계, 이미지 2/2

    • Next, remove the two screws located on the right side of the camera.

    번역하기

  7. Kodak EasyShare Z1015 IS Back Cover Replacement: 6 단계, 이미지 1/2 Kodak EasyShare Z1015 IS Back Cover Replacement: 6 단계, 이미지 2/2

    • After removing the screws located on the right side, remove the six screws located on the bottom of the camera.

    번역하기

  8. Kodak EasyShare Z1015 IS Back Cover Replacement: 7 단계, 이미지 1/2 Kodak EasyShare Z1015 IS Back Cover Replacement: 7 단계, 이미지 2/2

    • Lastly, remove the two screws located on the left side of the camera.

    번역하기

  9. Kodak EasyShare Z1015 IS Back Cover Replacement: 8 단계, 이미지 1/3 Kodak EasyShare Z1015 IS Back Cover Replacement: 8 단계, 이미지 2/3 Kodak EasyShare Z1015 IS Back Cover Replacement: 8 단계, 이미지 3/3

    • Once all eleven screws have been removed, use Plastic Opening Tools to take off the back cover.

    • Insert the plastic opening tool and apply leverage on each side of the camera. The recommended spots to apply leverage are shown in these pictures.

    번역하기

  10. Kodak EasyShare Z1015 IS Back Cover Replacement: 9 단계, 이미지 1/3 Kodak EasyShare Z1015 IS Back Cover Replacement: 9 단계, 이미지 2/3 Kodak EasyShare Z1015 IS Back Cover Replacement: 9 단계, 이미지 3/3

    • Apply pressure on the left and right side of the camera and pull the back cover away from the device.

    • Once the back cover has been successfully removed, you should have a total of eleven screws as well as the bottom cover separated from the camera.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

katie newman

회원 가입일: 10/28/10

30 평판

안내서 3개 작성하였습니다

배지: 7

배지 +4개 더

팀

Cal Poly, Team 5-16, Maness Fall 2010 Cal Poly, Team 5-16, Maness Fall 2010 회원

CPSU-MANESS-F10S5G16

4 회원들

안내서 11개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 1,391