소개

Use this guide to replace the back cover.

부품

부품은 필요하지 않습니다.

Remove the two 6.2mm Phillips screws on both sides of camera's back cover.
  • Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

댓글 쓰기

Turn camera so the bottom is facing up and the front is facing away.
  • Turn camera so the bottom is facing up and the front is facing away.

  • Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.

  • Back cover is now unscrewed an can be removed.

댓글 쓰기

  • Have the back of the camera facing up.

  • Unscrew the 6.2mm Phillips screw next to the viewfinder.

  • The back cover is now unscrewed. Lift up and pull the cover off evenly.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Michelle

회원 가입일: 2011년 04월 04일

86 평판

안내서 5개 작성하였습니다

Cal Poly, Team 25-28, Garner Spring 2011 Cal Poly, Team 25-28, Garner Spring 2011 회원

CPSU-GARNER-S11S25G28

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 7

전체 시간: 1,034