물건을 수리하세요 커뮤니티 상점

Kurio Touch 4S Power Button Replacement

필요한 것

  1. Kurio Touch 4S Power Button Replacement, Power Button: 1 단계, 이미지 1개 중 1개

    • Make sure to open the back cover easily using the plastic opening tool.

    편집

  2. Kurio Touch 4S Power Button Replacement: 2 단계, 이미지 3개 중 1개 Kurio Touch 4S Power Button Replacement: 2 단계, 이미지 3개 중 2개 Kurio Touch 4S Power Button Replacement: 2 단계, 이미지 3개 중 3개

    • Remove back cover by prying away from the device.

    • The easiest place to remove the cover is from the bottom and top; try to open it from the right and left sides.

    • Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

    편집

  3. Kurio Touch 4S Power Button Replacement: 3 단계, 이미지 2개 중 1개 Kurio Touch 4S Power Button Replacement: 3 단계, 이미지 2개 중 2개

    • To remove the battery, make sure the four 5mm Phillips screws on each side of your device is open using the Phillips #1 Screwdriver

    • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

    편집

  4. Kurio Touch 4S Power Button Replacement: 4 단계, 이미지 1개 중 1개

    • After you remove your four 5mm Philips screws use your plastic opening tool to help you open the plastic cover of your device.

    편집

  6. Kurio Touch 4S Power Button Replacement: 5 단계, 이미지 1개 중 1개

    • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

    편집

  7. Kurio Touch 4S Power Button Replacement: 6 단계, 이미지 1개 중 1개

    • Gently remove the plastic cover that is covering the camera.

    편집

  8. Kurio Touch 4S Power Button Replacement: 7 단계, 이미지 1개 중 1개

    • Use Phillips # 1 screw to open the four 5mm Philips screws on the motherboard.

    • Open the screws gently and do not apply too much force as you could damage the motherboard.

    편집

  9. Kurio Touch 4S Power Button Replacement: 8 단계, 이미지 1개 중 1개

    • Use the plastic opener to remove the battery.

    편집

  10. Kurio Touch 4S Power Button Replacement: 9 단계, 이미지 1개 중 1개
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Use tweezers to remove the black tape that is attached to the motherboard.

    편집

  11. Kurio Touch 4S Power Button Replacement: 10 단계, 이미지 2개 중 1개 Kurio Touch 4S Power Button Replacement: 10 단계, 이미지 2개 중 2개

    • Detach all the wire that are connected to the motherboard.

    • Detach the camera module and other components that are attached to the motherboard.

    편집

  12. Kurio Touch 4S Power Button Replacement: 11 단계, 이미지 1개 중 1개

    • Remove the motherboard with the help of plastic opener.

    • Detach the power plug before you remove the motherboard.

    편집

  13. Kurio Touch 4S Power Button Replacement: 12 단계, 이미지 1개 중 1개

    • Use tweezers to hold the power button and gently lift it up.

    • Replace the old power button with the new one.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

4다른 기여자 명과 함께

Moin Khan

회원 가입일: 01/21/15

234 평판

안내서 2개를 작성함

배지: 8

배지 +5개 더

팀

USF Tampa, Team 6-5, Brown Winter 2015 USF Tampa, Team 6-5, Brown Winter 2015 회원

USFT-BROWN-W15S6G5

3 회원들

안내서 10개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 6

전체 시간: 504