기기를 수리하세요 커뮤니티 상점

Kyocera Hydro Vibe Internal Speaker Replacement

소개

In this guide you will learn how to replace the speaker on the Kyocera Hydro Vibe. You will want to replace the speaker when the phone no longer produces sound. To replace the speaker you will first want to order a new speaker. You will then need a spudger and Phillips #000 screwdriver. The repair will take approximately an hour to complete. There are no foreseen hazards. However, you will want to be careful when taking apart the phone as to not damage it.

필요한 것

  1. Kyocera Hydro Vibe Internal Speaker Replacement, Internal Speaker: 1 단계, 이미지 1/3 Kyocera Hydro Vibe Internal Speaker Replacement, Internal Speaker: 1 단계, 이미지 2/3 Kyocera Hydro Vibe Internal Speaker Replacement, Internal Speaker: 1 단계, 이미지 3/3

    • Remove the back plate of the device by popping it off with your fingernail or a spudger.

    편집

  2. Kyocera Hydro Vibe Internal Speaker Replacement: 2 단계, 이미지 1/2 Kyocera Hydro Vibe Internal Speaker Replacement: 2 단계, 이미지 2/2

    • Remove six Phillips screws (screw length of 5.35 mm and screw head diameter of 2.95mm) on the back of the device using a Phillips #000 screwdriver.

    편집

  4. Kyocera Hydro Vibe Internal Speaker Replacement: 3 단계, 이미지 1/3 Kyocera Hydro Vibe Internal Speaker Replacement: 3 단계, 이미지 2/3 Kyocera Hydro Vibe Internal Speaker Replacement: 3 단계, 이미지 3/3

    • Remove the trim around the outside of the device by peeling it off with your hands.

    편집

  5. Kyocera Hydro Vibe Internal Speaker Replacement: 4 단계, 이미지 1/3 Kyocera Hydro Vibe Internal Speaker Replacement: 4 단계, 이미지 2/3 Kyocera Hydro Vibe Internal Speaker Replacement: 4 단계, 이미지 3/3

    • Remove battery using the spudger or your fingernails to pry the battery up out of the case.

    편집

  6. Kyocera Hydro Vibe Internal Speaker Replacement: 5 단계, 이미지 1/2 Kyocera Hydro Vibe Internal Speaker Replacement: 5 단계, 이미지 2/2

    • Now remove the rear frame, exposing the speaker. To remove the frame you can use the Spudger tool from the iFixit Tool kit or your hands.

    편집

  7. Kyocera Hydro Vibe Internal Speaker Replacement: 6 단계, 이미지 1/3 Kyocera Hydro Vibe Internal Speaker Replacement: 6 단계, 이미지 2/3 Kyocera Hydro Vibe Internal Speaker Replacement: 6 단계, 이미지 3/3

    • Remove the speaker from its location on the back frame using a spudger.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Ben Lange

회원 가입일: 11/01/18

139 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

IUPUI, Team S3-G6, Harley Fall 2018 IUPUI, Team S3-G6, Harley Fall 2018 회원

IUPUI-HARLEY-F18S3G6

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 194