주요 콘텐츠로 건너뛰기

소개

Providing information to disassemble the phone and replace the screen.

부품

지정된 부품이 없습니다.

  1. Kyocera Oystr Screen Replacement, Removing the battery: 1 단계, 이미지 1/3 Kyocera Oystr Screen Replacement, Removing the battery: 1 단계, 이미지 2/3 Kyocera Oystr Screen Replacement, Removing the battery: 1 단계, 이미지 3/3
    • Make sure the phone is turned off before disassembly.

    • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

    • Remove the battery from the casing. This is simply a precaution.

    • Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.

  2. Kyocera Oystr Screen Replacement, Removing screws from screen: 2 단계, 이미지 1/3 Kyocera Oystr Screen Replacement, Removing screws from screen: 2 단계, 이미지 2/3 Kyocera Oystr Screen Replacement, Removing screws from screen: 2 단계, 이미지 3/3
    • Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.

    • Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.

  3. Kyocera Oystr Screen Replacement, Exposing internal components: 3 단계, 이미지 1/3 Kyocera Oystr Screen Replacement, Exposing internal components: 3 단계, 이미지 2/3 Kyocera Oystr Screen Replacement, Exposing internal components: 3 단계, 이미지 3/3
    • Lift the plastic cover of the phone screen upwards by prying around the perimeter of the screen with a plastic opening tool.

    • After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.

  4. Kyocera Oystr Screen Replacement, Removing metal cover: 4 단계, 이미지 1/1
    • Remove metal cover by lifting up and away from the device.

  5. Kyocera Oystr Screen Replacement, Screen removal: 5 단계, 이미지 1/3 Kyocera Oystr Screen Replacement, Screen removal: 5 단계, 이미지 2/3 Kyocera Oystr Screen Replacement, Screen removal: 5 단계, 이미지 3/3
    • Remove the phone's speakers by using the plastic opening tool to pry up and away from the device. These speakers will dangle by the wires attached to the board.

    • Use your fingernail to detach the ribbon connecting the board to the screen.

    • Remove the damaged screen from the device.

  6. Kyocera Oystr Screen Replacement, Completing the repair: 6 단계, 이미지 1/1
    • Follow steps in reverse order to replace Kyocera Oystr’s screen.

결론

To reassemble your device, follow these instructions in reverse order.

David

회원 가입일: 2011년 10월 04일

24 평판

안내서 2개 작성하였습니다

Team

UW Stout, Team 5-7, Zhou Fall 2011 UW Stout, Team 5-7, Zhou Fall 2011 회원

UWSTOUT-ZHOU-F11S5G7

2 회원들

안내서 4개 작성하였습니다

2 Comments

My screen goes blank for days, then shows. maybe for minutes of seconds. Do I need to replace the screen, or is there a control I can try to bring back the display? The phone is charged and rings. Yours is a wonderful website. Thank you.

Martha Carnahan mpc@netsync.net

Martha Carnahan - 답글

My screen goes blank for days, then appears, but only for minutes or seconds before it goes blank again. Do I need to replace the screen, or do you know if there a command which would solve the problem? The phone is charged and rings.

Martha Carnahan - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 9

전체 시간: 2,022