기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

LG Dare Logic Board Replacement

소개

Use this guide to install a new logic board in your LG Dare.

필요한 것

  1. LG Dare Logic Board Replacement, Battery: 1 단계, 이미지 1/2 LG Dare Logic Board Replacement, Battery: 1 단계, 이미지 2/2

    • Remove the back cover by firmly pressing against the raised lip on the back panel. Slide the cover towards the top of the phone.

    번역하기

  2. LG Dare Logic Board Replacement: 2 단계, 이미지 1/3 LG Dare Logic Board Replacement: 2 단계, 이미지 2/3 LG Dare Logic Board Replacement: 2 단계, 이미지 3/3

    • Remove the battery by placing your fingernail or a opening tool in the recessed edge and lift the battery out.

    번역하기

  3. LG Dare Logic Board Replacement, Logic Board: 3 단계, 이미지 1/2 LG Dare Logic Board Replacement, Logic Board: 3 단계, 이미지 2/2

    • Use the #00 screwdriver to remove the six 4mm phillips screws located around the edges of the phone.

    번역하기

  5. LG Dare Logic Board Replacement: 4 단계, 이미지 1/3 LG Dare Logic Board Replacement: 4 단계, 이미지 2/3 LG Dare Logic Board Replacement: 4 단계, 이미지 3/3

    • Lift the back plastic cover off by moving the opening tool around the edges of the phone.

    • Wedging the opening tool in several places on the bottom of the phone will help release small tabs that hold the back to the front frame.

    • The side buttons may fall out when removing the back plastic.

    번역하기

  6. LG Dare Logic Board Replacement: 5 단계, 이미지 1/3 LG Dare Logic Board Replacement: 5 단계, 이미지 2/3 LG Dare Logic Board Replacement: 5 단계, 이미지 3/3

    • Pull off the back plastic panel.

    • Remove the buttons from the edge of the frame. The buttons are [lock], [volume control], [speaker], and [camera].

    번역하기

  7. LG Dare Logic Board Replacement: 6 단계, 이미지 1/1

    • Disconnect the three ribbon connectors from the motherboard.

    번역하기

  8. LG Dare Logic Board Replacement: 7 단계, 이미지 1/3 LG Dare Logic Board Replacement: 7 단계, 이미지 2/3 LG Dare Logic Board Replacement: 7 단계, 이미지 3/3

    • Remove the LED.

    • Remove the camera connector.

    • Remove the camera sensor from the logic board. Squeeze the sides of the camera sensor firmly and pull straight up.

    번역하기

  9. LG Dare Logic Board Replacement: 8 단계, 이미지 1/1

    • Open the USB port cover.

    번역하기

  10. LG Dare Logic Board Replacement: 9 단계, 이미지 1/3 LG Dare Logic Board Replacement: 9 단계, 이미지 2/3 LG Dare Logic Board Replacement: 9 단계, 이미지 3/3

    • Use the opening tool to lift up the green logic board in all areas and remove it.

    • The logic board may require some force to remove because it is taped to the plastic frame.

    • When removing the logic board, be careful not to tear any of the ribbon cables or side buttons.

    번역하기
결론

To re-assemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 7명과 함께

Haoyan Huang

회원 가입일: 01/26/12

139 평판

안내서 4개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team 9-4, Regan Winter 2012 Cal Poly, Team 9-4, Regan Winter 2012 회원

CPSU-REGAN-W12S9G4

5 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 2,157