주요 콘텐츠로 건너뛰기
  1. LG G Pad 7.0 LTE Camera Replacement, Removing the Back Cover: step 1, image 1 of 1
    • Power off your device before beginning the battery replacement (hold the button with the red marker until the device prompts you to power it off, then tap "Power Off").

    • Be wary of the front screen and SIM Card while tearing down the device.

  2. LG G Pad 7.0 LTE Camera Replacement: step 2, image 1 of 1
    • Put on an Anti-Static Wrist Strap to prevent damage to sensitive electrical components (optional).

    • To separate the frame from the cover, pry between the screen and the cover using a plastic prying tool.

    • Begin at the top left of the device to avoid damaging the motherboard and work your way around the perimeter of the screen.

    • When you pry your device open, be wary of the volume rockers, motherboard, and camera. These components are delicate and can be sensitive to static electricity.

  3. LG G Pad 7.0 LTE Camera Replacement, Camera: step 3, image 1 of 1
    • Disconnect camera ribbon cable by prying up on it with a plastic pry tool.

  4. LG G Pad 7.0 LTE Camera Replacement: step 4, image 1 of 1
    • There is a light adhesive holding the camera in the device.

    • Using tweezers or a small plastic pry tool gently pull or pry the camera out of the device (red marker).

  5. LG G Pad 7.0 LTE Camera Replacement: step 5, image 1 of 1
    • Install the new camera into device by gently placing it in its corresponding place until it pops in.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Fadi Bitar

회원 가입일: 2016년 09월 26일

880 평판

안내서 6개 작성하였습니다

USF Tampa, Team 14-6, Eyestone Fall 2016 USF Tampa, Team 14-6, Eyestone Fall 2016 회원

USFT-EYESTONE-F16S14G6

4 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 252