기기를 수리하세요 커뮤니티 상점

LG G3 Vigor Headphone Jack Replacement

소개

Use this guide to replace the headphone jack in your LG G3 Vigor.

필요한 것

  1. LG G3 Vigor Headphone Jack Replacement, Rear Case: 1 단계, 이미지 1/1

    • Locate the notch on the bottom right of the phone.

    편집

  2. LG G3 Vigor Headphone Jack Replacement: 2 단계, 이미지 1/1

    • Gently pull the cover on the back of the phone off to locate the battery.

    편집

  3. LG G3 Vigor Headphone Jack Replacement, Battery: 3 단계, 이미지 1/1

    • Remove the battery by lifting from the slot at the bottom of the battery.

    편집

  4. LG G3 Vigor Headphone Jack Replacement, Midframe: 4 단계, 이미지 1/1

    • Remove the twelve Phillips #00 screws securing the midframe to the rest of the phone.

    편집

  6. LG G3 Vigor Headphone Jack Replacement: 5 단계, 이미지 1/3 LG G3 Vigor Headphone Jack Replacement: 5 단계, 이미지 2/3 LG G3 Vigor Headphone Jack Replacement: 5 단계, 이미지 3/3

    • Work a plastic opening tool around the perimeter of the phone to separate the midframe from the rest of the phone.

    편집

  7. LG G3 Vigor Headphone Jack Replacement, Rear Facing Camera: 6 단계, 이미지 1/1

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard. Then remove the rear facing camera.

    편집

  8. LG G3 Vigor Headphone Jack Replacement, Front Facing Camera: 7 단계, 이미지 1/2 LG G3 Vigor Headphone Jack Replacement, Front Facing Camera: 7 단계, 이미지 2/2

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard.

    • Remove the front camera.

    편집

  9. LG G3 Vigor Headphone Jack Replacement, Motherboard: 8 단계, 이미지 1/1

    • Use the flat edge of a spudger to disconnect the motherboard ribbon connector.

    편집

  10. LG G3 Vigor Headphone Jack Replacement: 9 단계, 이미지 1/2 LG G3 Vigor Headphone Jack Replacement: 9 단계, 이미지 2/2

    • Use the pointed end of a spudger to push back the two motherboard retaining flaps.

    • The motherboard should now be able to be lifted out of the device.

    편집

  11. LG G3 Vigor Headphone Jack Replacement, Headphone Jack: 10 단계, 이미지 1/1

    • Remove the headphone jack by inserting the spudger into the jack and pulling it up and out.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

Geoff Wacker

회원 가입일: 09/30/13

89,972 평판

안내서 89개 작성하였습니다

배지: 44

배지 +41개 더

댓글 한 개

Works also with D855. There are only a view differences, e.g. screws and a minimal different motherboarddesign.

flux - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 2

전체 시간: 453