기기를 수리하세요 커뮤니티 상점

LG G3 Vigor Vibration Motor Replacement

소개

Use this guide to replace the vibration motor on your LG G3 Vigor.

필요한 것

  1. LG G3 Vigor Vibration Motor Replacement, Rear Case: 1 단계, 이미지 1/1

    • Locate the notch on the bottom right of the phone.

    편집

  2. LG G3 Vigor Vibration Motor Replacement: 2 단계, 이미지 1/1

    • Gently pull the cover on the back of the phone off to locate the battery.

    편집

  3. LG G3 Vigor Vibration Motor Replacement, Battery: 3 단계, 이미지 1/1

    • Remove the battery by lifting from the slot at the bottom of the battery.

    편집

  4. LG G3 Vigor Vibration Motor Replacement, Midframe: 4 단계, 이미지 1/1

    • Remove the twelve Phillips #00 screws securing the midframe to the rest of the phone.

    편집

  6. LG G3 Vigor Vibration Motor Replacement: 5 단계, 이미지 1/3 LG G3 Vigor Vibration Motor Replacement: 5 단계, 이미지 2/3 LG G3 Vigor Vibration Motor Replacement: 5 단계, 이미지 3/3

    • Work a plastic opening tool around the perimeter of the phone to separate the midframe from the rest of the phone.

    편집

  7. LG G3 Vigor Vibration Motor Replacement, Rear Facing Camera: 6 단계, 이미지 1/1

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard. Then remove the rear facing camera.

    편집

  8. LG G3 Vigor Vibration Motor Replacement, Front Facing Camera: 7 단계, 이미지 1/2 LG G3 Vigor Vibration Motor Replacement, Front Facing Camera: 7 단계, 이미지 2/2

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard.

    • Remove the front camera.

    편집

  9. LG G3 Vigor Vibration Motor Replacement, Motherboard: 8 단계, 이미지 1/1

    • Use the flat edge of a spudger to disconnect the motherboard ribbon connector.

    편집

  10. LG G3 Vigor Vibration Motor Replacement: 9 단계, 이미지 1/2 LG G3 Vigor Vibration Motor Replacement: 9 단계, 이미지 2/2

    • Use the pointed end of a spudger to push back the two motherboard retaining flaps.

    • The motherboard should now be able to be lifted out of the device.

    편집

  11. LG G3 Vigor Vibration Motor Replacement, Vibration Motor: 10 단계, 이미지 1/1

    • Use a spudger to remove the vibration motor.

    • It may have some slight adhesive, so some force may be necessary.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

Geoff Wacker

회원 가입일: 09/30/13

89,895 평판

안내서 89개 작성하였습니다

배지: 44

배지 +41개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 436