소개

Use this guide to remove the speakers from the device.

부품

부품은 필요하지 않습니다.

  1. Use the spudger to pry out the indicated rubber squares.
    • Use the spudger to pry out the indicated rubber squares.

    • Use the #0 Phillips screwdriver to take out the revealed screws.

    댓글 쓰기

  2. Carefully lodge the spudger between the face plate and the hinge mechanism.
    • Carefully lodge the spudger between the face plate and the hinge mechanism.

    • Gently pry the face plate until it releases from place holders.

    댓글 쓰기

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a spudger, detach the speakers from their place holders.

    댓글 쓰기

    • Using the spudger, pry between the speaker circuit board and base to detach with ease.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Harry Black

회원 가입일: 2010년 04월 20일

56 평판

안내서 1개 작성함

Cal Poly, Team 10-44, Garner Spring 2010 Cal Poly, Team 10-44, Garner Spring 2010 회원

CPSU-GARNER-S10S10G44

4 회원들

안내서 18개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 1,433