소개

The following guide explains how to replace the display.

부품

부품은 필요하지 않습니다.

  1. Insert a plastic opening tool between the seams of the device and pry the back cover away from the phone. Remove the battery and simcard.
    • Insert a plastic opening tool between the seams of the device and pry the back cover away from the phone.

    • Remove the battery and simcard.

  2. Remove twelve 3mm screws (with the phillips head 000) around frame and near sim and sd cards.
    • Remove twelve 3mm screws (with the phillips head 000) around frame and near sim and sd cards.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove bottom plate where the charger port is located.
    • Remove bottom plate where the charger port is located.

  5. Insert a plastic opening tool between the seams of the device and apply some pressure to lift off the cover. Insert a plastic opening tool between the seams of the device and apply some pressure to lift off the cover.
    • Insert a plastic opening tool between the seams of the device and apply some pressure to lift off the cover.

  6. Flip over to the face of the device. Lift off glass screen (display).
    • Flip over to the face of the device.

    • Lift off glass screen (display).

결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

Craig Lashley

회원 가입일: 2014년 10월 08일

307 평판

안내서 1개 작성함

USF Tampa, Team 9-1, Leahy Fall 2014 USF Tampa, Team 9-1, Leahy Fall 2014 회원

USFT-LEAHY-F14S9G1

3 회원들

안내서 5개 작성하였습니다

Great tutorial as always on ifixit. Just be mindful of the top clip holding the glass bevel as it can be tricky and is close to circuitry.

Sooty - 답글

Im miles i great this ifixit i'm beginner

Omair Sarip -

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 13

전체 시간: 5,098