소개

A quick guide to removing the front cover of the flip phone.

  1. Turn the phone on its back.
    • Turn the phone on its back.

    댓글 쓰기

  2. Orient the phone as shown.
    • Orient the phone as shown.

    • Remove the battery cover by pushing upward with your thumb.

    댓글 쓰기

    • Place your fingernail at the top of the battery and pry the battery out towards you.

    댓글 쓰기

    • Flip the phone open.

    • Remove the four rubber plugs, located at the corners of the LCD screen, with a push-pin.

    • Use a Phillips #00 screwdriver to remove the four screws located underneath the rubber plugs.

    댓글 쓰기

    • Insert the plastic opening tool in the seam of the top portion of the flip phone.

    • Gently pry the seam open.

    • Move the opening tool around the perimeter of the seam and gently take the front LCD face plate out.

    댓글 쓰기

    • Close the flip phone.

    • Hold the base of the phone and gently remove the faceplate.

    • Place the phone and the faceplate on a clean, flat surface.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Douglas Blaalid

회원 가입일: 2010년 01월 13일

282 평판

안내서 8개 작성하였습니다

Cal Poly, Team 4-13, Forte Winter 2010 Cal Poly, Team 4-13, Forte Winter 2010 회원

CPSU-FORTE-W10S4G13

5 회원들

안내서 15개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 2

전체 시간: 1,834