메인 콘텐츠로 스킵하기

소개

This guide illustrates how to replace the LG VX5300 keypad.

부품

지정된 부품이 없습니다.

  1. Carefully slide battery cover off in a downward direction. Using the plastic opening tool, remove the battery. Light force may be necessary. Using the plastic opening tool, remove the battery. Light force may be necessary.
    • Carefully slide battery cover off in a downward direction.

    • Using the plastic opening tool, remove the battery. Light force may be necessary.

  2. Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.
    • Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.

  3. Using the plastic opening tool, carefully lift the back cover off.
    • Using the plastic opening tool, carefully lift the back cover off.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars. Look to the following photo for the location of the two sensor bars.
    • Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars.

    • Look to the following photo for the location of the two sensor bars.

    • Without disconnecting the orange wire, carefully flip the computer chip over and lay flat on the table, exposing the keypad.

  6. Carefully remove the keypad and replace with the new keypad. If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.
    • Carefully remove the keypad and replace with the new keypad.

    • If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.

  7. Carefully set the computer chip back in place.
    • Carefully set the computer chip back in place.

  8. Place the back cover back on and secure it with the screws. Place the back cover back on and secure it with the screws.
    • Place the back cover back on and secure it with the screws.

  9. Insert the battery. Slide the back cover on the phone.
    • Insert the battery.

    • Slide the back cover on the phone.

결승점

Ashley

회원 가입일: 2013년 02월 12일

9 평판

안내서 3개 작성하였습니다

Ohio State, Team 1-1, Buehl Spring 2013 Ohio State, Team 1-1, Buehl Spring 2013 회원

OSU-BUEHL-S13S1G1

3 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 434