소개
The LeapFrog LeapPad #32400 requires four (4) AA batteries which are easily replaced without any tools. The LeapPad should be powered off before removal of the existing batteries.
Check the troubleshooting page for symptoms to make sure this guide is the best route: LeapFrog LeapPad #32400 Troubleshooting Page
-
-
Turn the tablet so the back is facing up.
-
Remove the battery covers by sliding the covers towards the sides and away from the center of the device.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
팀
University of Delaware, Team 11-2, McGuire Spring 2023 University of Delaware, Team 11-2, McGuire Spring 2023 회원
UD-MCGUIRE-S23S11G2
5 회원들
안내서 6개 작성하였습니다
