기기를 수리하세요 커뮤니티 상점

LeapFrog LeapPad Ultimate Camera Replacement

소개

A guide on how to replace the camera in a LeapFrog LeapPad Ultimate.

필요한 것

  1. LeapFrog LeapPad Ultimate Camera Replacement, Back Panel: 1 단계, 이미지 1/2 LeapFrog LeapPad Ultimate Camera Replacement, Back Panel: 1 단계, 이미지 2/2

    • Flip over the Pad to its back side to begin the removal of the back panel.

    • Begin by removing the blue rim along the edge of the device. It runs along the green silicone lining.

    • This is very difficult to remove , so do be patient. To help remove the seal, both a metal spudger and plastic opening tool may be used.

    • Remove the pen from its place before starting to avoid tangling.

    번역하기

  2. LeapFrog LeapPad Ultimate Camera Replacement: 2 단계, 이미지 1/2 LeapFrog LeapPad Ultimate Camera Replacement: 2 단계, 이미지 2/2

    • Once the blue rim is removed, the 12 screws will be visible.

    • Use the Phillips #1 screwdriver to unscrew all 12 screws.

    번역하기

  3. LeapFrog LeapPad Ultimate Camera Replacement, Camera: 3 단계, 이미지 1/1

    • Remove the 3 screws on each corner of the motherboard

    번역하기

  5. LeapFrog LeapPad Ultimate Camera Replacement: 4 단계, 이미지 1/3 LeapFrog LeapPad Ultimate Camera Replacement: 4 단계, 이미지 2/3 LeapFrog LeapPad Ultimate Camera Replacement: 4 단계, 이미지 3/3

    • Remove the ribbon on the bottom of the motherboard and the ribbon on the left side of the motherboard.

    • There will be a small black switch on top of the ribbons that you must flip to take them out.

    번역하기

  6. LeapFrog LeapPad Ultimate Camera Replacement: 5 단계, 이미지 1/1

    • Remove the 3-pin connector on the top left side of the motherboard.

    번역하기

  7. LeapFrog LeapPad Ultimate Camera Replacement: 6 단계, 이미지 1/2 LeapFrog LeapPad Ultimate Camera Replacement: 6 단계, 이미지 2/2

    • Flip the motherboard to its back side and pinch the 2 green hooks to remove the camera cover

    번역하기

  8. LeapFrog LeapPad Ultimate Camera Replacement: 7 단계, 이미지 1/1

    • Remove the ribbon connecting the camera to the motherboard. You have now taken out the camera and can replace it with a new one.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Nabil Mustafa

회원 가입일: 09/21/18

223 평판

안내서 2개 작성하였습니다

배지: 7

배지 +4개 더

팀

University of North Texas, Team S1-G13, Riccardelli Fall 2018 University of North Texas, Team S1-G13, Riccardelli Fall 2018 회원

UNT-RICCARDELLI-F18S1G13

4 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 207