기기를 수리하세요 커뮤니티 상점

Leapfrog LeapPad 3 Display Assembly Replacement

소개

If your display assembly is scratched or not working properly this is the appropriate guide to get the issue resolved. It is a rather lengthy, however, it is complete and few tools are needed.

필요한 것

동영상 개요

  1. Leapfrog LeapPad 3 Display Assembly Replacement, Battery: 1 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement, Battery: 1 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement, Battery: 1 단계, 이미지 3/3
    이 단계에 사용된 도구:
    Anti-Static Wrist Strap
    $7.95
    구매

    • Before taking apart your device, ensure that it is turned off and that your anti-static wrist strap is secured to a ground.

    • Remove the six 10.0 mm Phillips #0 screws from the outer case and remove the cover with your hands.

    • You will not need to pry the case off.

    편집

  2. Leapfrog LeapPad 3 Display Assembly Replacement: 2 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement: 2 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement: 2 단계, 이미지 3/3

    • Unplug the battery from the motherboard with your hands.

    • The battery sits to the right of the motherboard.

    편집

  3. Leapfrog LeapPad 3 Display Assembly Replacement: 3 단계, 이미지 1/2 Leapfrog LeapPad 3 Display Assembly Replacement: 3 단계, 이미지 2/2

    • Pry the battery gently off of the plastic platform with an opening tool.

    • Do not to puncture the battery, as the material inside can be dangerous.

    편집

  4. Leapfrog LeapPad 3 Display Assembly Replacement, Speaker: 4 단계, 이미지 1/2 Leapfrog LeapPad 3 Display Assembly Replacement, Speaker: 4 단계, 이미지 2/2

    • Disconnect the audio cord from the motherboard using a plastic opening tool.

    • When re-plugging this cord be sure it is flush with the slot, otherwise the speaker and directional pad will malfunction.

    • Use caution when unplugging, and re-plugging the ribbon cord as they are fragile.

    편집

  6. Leapfrog LeapPad 3 Display Assembly Replacement: 5 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement: 5 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement: 5 단계, 이미지 3/3

    • Unscrew the five 6.0 mm phillips head screws from the board containing the audio jack and directional pad.

    편집

  7. Leapfrog LeapPad 3 Display Assembly Replacement: 6 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement: 6 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement: 6 단계, 이미지 3/3

    • Unscrew the three 6.5 mm phillips head screws holding down the speaker to the right of the audio jack.

    • Remove the board and speaker from the device.

    편집

  8. Leapfrog LeapPad 3 Display Assembly Replacement, Motherboard: 7 단계, 이미지 1/2 Leapfrog LeapPad 3 Display Assembly Replacement, Motherboard: 7 단계, 이미지 2/2

    • Unplug the front facing camera cord with an opening tool to free the top of the motherboard.

    편집

  9. Leapfrog LeapPad 3 Display Assembly Replacement: 8 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement: 8 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement: 8 단계, 이미지 3/3

    • Remove the three 6 mm phillips head screws holding the motherboard to the display assembly.

    편집

  10. Leapfrog LeapPad 3 Display Assembly Replacement: 9 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement: 9 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement: 9 단계, 이미지 3/3

    • Carefully lift the motherboard out of the case, exposing the last remaining cord on the underside of the motherboard.

    • Disconnect the gold display assembly cord with an opening tool to fully disconnect the motherboard.

    • The device was rotated 180 degrees in order to unplug the display assembly cord.

    편집

  11. Leapfrog LeapPad 3 Display Assembly Replacement, Display Assembly: 10 단계, 이미지 1/2 Leapfrog LeapPad 3 Display Assembly Replacement, Display Assembly: 10 단계, 이미지 2/2

    • Unscrew the eight 6.5mm Phillips #0 screws from the plastic casing.

    편집

  12. Leapfrog LeapPad 3 Display Assembly Replacement: 11 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement: 11 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement: 11 단계, 이미지 3/3

    • Remove the covering with your hands to allow full view of the display assembly.

    편집

  13. Leapfrog LeapPad 3 Display Assembly Replacement: 12 단계, 이미지 1/3 Leapfrog LeapPad 3 Display Assembly Replacement: 12 단계, 이미지 2/3 Leapfrog LeapPad 3 Display Assembly Replacement: 12 단계, 이미지 3/3

    • Remove the display assembly from the black rubber sleeve carefully.

    • There is a specific orientation for the rubber sleeve so take note of its position.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Matt Irvine

회원 가입일: 02/04/16

952 평판

안내서 6개 작성하였습니다

배지: 20

배지 +17개 더

팀

USF Tampa, Team 16-2, Blackwell Winter 2016 USF Tampa, Team 16-2, Blackwell Winter 2016 회원

USFT-BLACKWELL-W16S16G2

3 회원들

안내서 12개 작성하였습니다

댓글 4개

Everything worked ok but unit now will not go to home page. after I replaced the display. They tell you necessary tools but never tell you where or how to use the wrist grounding strap.

Dave Alan - 답글

Bonjour, j’ai bien réussi à accéder à l’écran,

Ma question:

Oû peut-on se procurer un écran neuf SVP?

Gregory Commarmond - 답글

Pouvez vous m'indiquer où trouver un écran de remplacement ?

Merci d'avance

Domi Luky - 답글

OK, Visiblement ce tuto ne sert plus à rien car il est Impossible de trouver le display de remplacement!!

Domi Luky - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 7

30일 전: 9

전체 시간: 1,065