주요 콘텐츠로 건너뛰기

Lego Dimensions Starter Pack USB Cable Replacement

필요한 것

  1. Lego Dimensions Starter Pack USB Cable Replacement, Top Cover Parts: 1 단계, 이미지 1/2 Lego Dimensions Starter Pack USB Cable Replacement, Top Cover Parts: 1 단계, 이미지 2/2
    • Be careful not to crack the cover.

    • Use the metal spudger to gently pry open the corners of the top cover.

  2. Lego Dimensions Starter Pack USB Cable Replacement: 2 단계, 이미지 1/1
    • Be careful not to crack the top cover.

    • Use the metal spudger to gently pry up the center of the top cover.

  3. Lego Dimensions Starter Pack USB Cable Replacement: 3 단계, 이미지 1/1
    • Pull the top cover off.

  4. Lego Dimensions Starter Pack USB Cable Replacement: 4 단계, 이미지 1/1
    • Lift up the circular illumination stand and remove it from the toy pad.

  5. Lego Dimensions Starter Pack USB Cable Replacement: 5 단계, 이미지 1/1
    • Lift up the white L-shaped pieces and remove them from the toy pad.

  6. Lego Dimensions Starter Pack USB Cable Replacement, USB Cable: 6 단계, 이미지 1/1
    • Pull the white connector away from the motherboard, keeping the white connector parallel to the board.

    • You may need to use a plastic opening tool or spudger to help separate the connector. Avoid pulling firmly on the wires themselves.

    • Remove the USB cable from the toy pad.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Alyssa Lach

회원 가입일: 11/06/17

509 평판

안내서 4개 작성하였습니다

IUPUI, Team S5-G2, Baechle Fall 2017 IUPUI, Team S5-G2, Baechle Fall 2017 회원

IUPUI-BAECHLE-F17S5G2

2 회원들

안내서 8개 작성하였습니다

댓글 2개

Where do you buy the USB cable from?

jaimea371 - 답글

Where do you buy the USB cable from?

mguzmanv - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 34

전체 시간: 5,301