기기를 수리하세요 커뮤니티 상점

Lenovo 100e 2nd gen Battery Replacement

보관된 가이드
해당 안내서는 단지 역사적인 목적으로 보관됩니다. 최신 버전 안내서를 사용하여 수리 하십시오.

소개

This guide demonstrates how the replace the battery for the Lenovo 100e 2nd gen (model number: 81MB). This guide will give step-by-step instructions on how to properly remove the old battery and place the new battery. The battery of the laptop serves the purpose of powering the device. Some signs that your battery needs to be replaced include computer not turning on, laptop overheating, and laptop failing to charge.

필요한 것

  1. Lenovo 100e 2nd gen Battery Replacement, Battery: 1 단계, 이미지 1/3 Lenovo 100e 2nd gen Battery Replacement, Battery: 1 단계, 이미지 2/3 Lenovo 100e 2nd gen Battery Replacement, Battery: 1 단계, 이미지 3/3

    • Before you begin, make sure the laptop is powered off and unplug all cables from the device.

    • Use the Phillips #0 screwdriver to remove the nine 1.2 mm screws on the bottom side of the laptop.

    번역하기

  2. Lenovo 100e 2nd gen Battery Replacement: 2 단계, 이미지 1/3 Lenovo 100e 2nd gen Battery Replacement: 2 단계, 이미지 2/3 Lenovo 100e 2nd gen Battery Replacement: 2 단계, 이미지 3/3

    • Use a plastic opening tool to pry the bottom cover from the laptop.

    • Pry all four sides of the bottom panel to safely remove the bottom panel from the device.

    • Carefully remove the bottom panel and place it to the side.

    번역하기

  4. Lenovo 100e 2nd gen Battery Replacement: 3 단계, 이미지 1/3 Lenovo 100e 2nd gen Battery Replacement: 3 단계, 이미지 2/3 Lenovo 100e 2nd gen Battery Replacement: 3 단계, 이미지 3/3

    • Use a Phillips #0 screwdriver to remove the four 1 mm screws that are holding the battery in place.

    번역하기

  5. Lenovo 100e 2nd gen Battery Replacement: 4 단계, 이미지 1/3 Lenovo 100e 2nd gen Battery Replacement: 4 단계, 이미지 2/3 Lenovo 100e 2nd gen Battery Replacement: 4 단계, 이미지 3/3

    • Unplug the battery from the motherboard.

    • Lift the daughterboard ribbon to make it easier to remove the battery safely.

    • Completely remove the old battery and place it to the side.

    번역하기

  6. Lenovo 100e 2nd gen Battery Replacement: 5 단계, 이미지 1/2 Lenovo 100e 2nd gen Battery Replacement: 5 단계, 이미지 2/2

    • Insert the new battery by connecting the battery to the motherboard.

    • Lift the daughterboard ribbon and place the new battery under the ribbon.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Meri Wheeler

회원 가입일: 02/19/21

178 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

University of Alabama, Team S3-G2, Bedsole Spring 2021 University of Alabama, Team S3-G2, Bedsole Spring 2021 회원

UA-BEDSOLE-S21S3G2

2 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 3

전체 시간: 1,021