Lenovo 300e Windows 2nd Gen Storage Card Replacement

소개

Please power off your device before the replacement.

Failure to do this may result in harm to yourself or the device.

By continuing with this replacement, you assume any loss of data, files, and other info on your device that may lost during the replacement. You are solely responsible.

There is no reason you may 'need' this replacement unless your device is dealing with some sort of corruption. Any other reasons may be personal reasons such as data transfer.

필요한 것

1 단계 Remove the bottom panel.

Lenovo 300e Windows 2nd Gen Storage Card Replacement, Remove the bottom panel.: 1 단계, 이미지 1개 중 1개

Flip the device upside down. Remove the bottom panel. Unscrew all 9 screws.
Some screws may not lift out of the panel. If this happens, simply loosen all screws and lift the entire panel off of the device.

번역하기

2 단계 Unscrew the Storage Card.

Lenovo 300e Windows 2nd Gen Storage Card Replacement, Unscrew the Storage Card.: 2 단계, 이미지 1개 중 1개

Unscrew the screw holding the storage card in place.
Make sure you uncrew the right card. The card is located near the top. (assuming the battery is the closest to you) It isn't the one all the way at the top, it is below the one at the top and is slightly bigger.

번역하기

3 단계 Remove and replace the Storage Card.

Lenovo 300e Windows 2nd Gen Storage Card Replacement, Remove and replace the Storage Card.: 3 단계, 이미지 2개 중 1개

Lenovo 300e Windows 2nd Gen Storage Card Replacement, Remove and replace the Storage Card.: 3 단계, 이미지 2개 중 2개

Carefully wiggle the storage card out of the port.
Insert your replacement storage card and put the screw back in.
The card may sit on top of the spot where the screw enters. This is okay, as long as it is only the orangish/brownish part.
Put on the back panel by putting the screws in their original places and tightening them.