주요 콘텐츠로 건너뛰기

소개

This is a step by step guide on how to remove the fan assembly on the Lenovo Thinkpad Edge E431.

부품

지정된 부품이 없습니다.

  1. Close the device and remove all power cables.
    • Close the device and remove all power cables.

    • Lay the laptop flat with the bottom facing upwards.

  2. Remove the four 2mm Phillips #00 screws from the bottom panel.
    • Remove the four 2mm Phillips #00 screws from the bottom panel.

  3. Remove the back panel of the device. Remove the back panel of the device.
    • Remove the back panel of the device.

  4. Remove the nine 2mm Phillips screws from the cooling assembly. Using the tweezers, remove the fan power cable from the motherboard. Using the tweezers, remove the fan power cable from the motherboard.
    • Remove the nine 2mm Phillips screws from the cooling assembly.

    • Using the tweezers, remove the fan power cable from the motherboard.

  5. Lift the fan assembly out of the laptop.
    • Lift the fan assembly out of the laptop.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nathan Behan

회원 가입일: 2018년 02월 14일

396 평판

안내서 3개 작성하였습니다

USF Tampa, Team S3-G3, Nance Spring 2018 USF Tampa, Team S3-G3, Nance Spring 2018 회원

USFT-NANCE-S18S3G3

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 10

전체 시간: 349