소개

This guide can be used if the optical drive is malfunctioning. Removing the optical drive is also required before the main cover can be opened up.

부품

부품은 필요하지 않습니다.

  1. Remove the three 6mm Phillips #0 screws holding the back access panel on. Remove the three 6mm Phillips #0 screws holding the back access panel on.
    • Remove the three 6mm Phillips #0 screws holding the back access panel on.

  2. Slide the cover toward you to unlatch it. The edge of the panel will slide away from  the  laptop so it can be lifted.
    • Slide the cover toward you to unlatch it.

    • The edge of the panel will slide away from the laptop so it can be lifted.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove one 6mm Phillips #0 screw holding in the optical drive. Remove one 6mm Phillips #0 screw holding in the optical drive.
    • Remove one 6mm Phillips #0 screw holding in the optical drive.

  5. Grab the optical drive by the edge and pull it out. Grab the optical drive by the edge and pull it out.
    • Grab the optical drive by the edge and pull it out.

결론

To reassemble your device, follow these instructions in reverse order.

Caleb DesJardins

회원 가입일: 2018년 09월 24일

683 평판

안내서 6개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 14

전체 시간: 110